Falcon Lock MEL-F25V-TP-US26D-36X96 Motorized Electric Latch Retraction Exit Device, Thumb Pull Trim, Satin Chrome

Falcon Lock MEL-F25V-TP-US26D-36X96 KIT is a sophisticated motorized electric latch retraction (MEL) system designed for enhanced security and ease of access in multifamily and commercial environments. This fire-rated surface vertical rod exit device features a thumb piece pull trim and operates on a reliable 24VDC power supply, ensuring efficient performance with a low inrush current of just 1.0 amps. The MEL option allows for electronic control of the exit device, providing a seamless solution for authorized users. Integrated with credential readers, the system can momentarily unlatch doors or maintain extended access, effectively replacing mechanical dogging. With its modular design, installation is straightforward, and on-board diagnostics simplify troubleshooting. Constructed from durable materials in a sleek satin chrome finish (626/US26D), this Grade 1 exit device is not only vandal-resistant but also self-calibrating, ensuring optimal performance under various conditions. Compatible with a range of power supplies and requiring a standard mortise cylinder, the MEL-F25V is customizable to meet specific security needs. For added convenience, a power transfer option is available for a clean wiring path from door to frame. Elevate your security infrastructure with the Falcon Lock MEL-F25V-TP, where innovative design meets reliability.

KIT - Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Thumb Piece Pull Trim 512TP, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged