Falcon Lock RX-MEL-25C-L-NL-DAN-US26D-36X96-LHR KIT - RX Motorized Electric Latch Retraction Exit Device with Dane Lever Trim

Falcon Lock RX-MEL-25C-L-NL-DAN-US26D-36X96-LHR KIT is a sophisticated exit device designed for both multifamily and commercial properties. Featuring a motorized electric latch retraction (MEL) system, this concealed vertical rod exit device offers energy-efficient electronic control, making it an ideal solution for cost-conscious installations. The system allows for momentary unlatching via credential readers, or extended latch retraction for easy access, eliminating the need for mechanical dogging. This exit device is compatible with a 1-1/4 mortise cylinder and accommodates standard door sizes of 36 inches by 96 inches with a left-hand reverse (LHR) configuration. Constructed for durability, it boasts a Grade 1 rating and comes in a sleek satin chrome finish (626/US26D). The self-calibrating motor assembly ensures ease of installation and troubleshooting, while the vandal-resistant design provides added security against tampering. For optimal performance, power requirements include 24VDC at 1 Amp, and it is compatible with various Schlage power supplies. Additional features include on-board diagnostics and modular design for simplified upgrades to existing Falcon exit devices. Enhance your security with the Falcon Lock RX-MEL-25C-L-NL-DAN, where innovation meets reliability.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Concealed Vertical Rod Exit Device, Escutcheon x Dane Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, LHR, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged