Falcon Lock RX-MEL-25R-L-BE-DAN-US26D-36-LHR KIT RX Motorized Electric Latch Exit Device, Dane Lever Trim 510L-BE, 24VDC

Falcon Lock RX-MEL-25R-L-BE-DAN-US26D-36-LHR KIT offers an advanced solution for efficient access control in multifamily and commercial settings. This motorized electric latch retraction (MEL) system enhances the functionality of exit devices, allowing for seamless electronic control without compromising on safety. Designed for use with Falcon's 24 and 25 Series exit devices, the RX-MEL system ensures mechanical egress at all times while offering the convenience of credential reader compatibility. The sleek satin chrome finish (626/US26D) not only adds a modern aesthetic but also ensures durability and resistance to wear. With a low inrush current of just 1.0 amp, this device can efficiently work with standard Schlage power supplies, making it an economical choice for installations requiring multiple components. The modular design simplifies installation, while onboard diagnostics aid in troubleshooting. Features such as vandal resistance, self-calibrating motor assembly, and the ability to electronically dog the push bar enhance both security and ease of use. This kit is perfect for settings where controlled entry is essential, providing an effective alternative to traditional mechanical dogging. Ensure your facility is secure with the reliability and innovation of the Falcon Lock RX-MEL-25R-L-BE-DAN.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Rim Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 36in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged