Falcon Lock RX-MEL-25R-L-NL-DAN-US26D-36-LHR KIT RX Motorized Electric Latch Exit Device, 36in LHR, Grade 1, Satin Chrome

Falcon Lock RX-MEL-25R-L-NL-DAN-US26D-36-LHR KIT offers a sophisticated solution for secure and efficient access control. This kit features a Motorized Electric Latch Retraction (MEL) system that enhances the functionality of rim exit devices, making it ideal for multifamily and commercial properties. The inclusion of a Dane Lever Nightlatch Trim provides both security and ease of use, while the satin chrome finish adds a touch of elegance. Designed to support a 24VDC power supply with a low inrush current of just 1.0 amps, the RX-MEL-25R ensures energy efficiency and compatibility with standard Schlage power supplies. Its modular design simplifies installation, allowing for seamless integration with existing Falcon 24 or 25 Series exit devices. The self-calibrating motor assembly and on-board diagnostics enhance reliability and reduce maintenance efforts. This exit device is vandal-resistant, detecting tampering and attacks to maintain security integrity. Additionally, mechanical egress is always available, reinforcing safety standards. With a left-hand reversible configuration, this device caters to various door setups. For building professionals and knowledgeable homeowners, the Falcon Lock RX-MEL-25R-L-NL-DAN-US26D-36-LHR KIT stands out as a robust and versatile choice for heightened security and access management.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Rim Exit Device, Escutcheon x Dane Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 36in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged