Falcon Lock RX-MEL-25V-L-BE-DAN-US26D-36X96-RHR RX Request to Exit Motorized Electric Latch, SVR Vertical Rod, Satin Chrome

Falcon Lock RX-MEL-25V-L-BE-DAN-US26D-36X96-RHR KIT is a state-of-the-art solution for secure access control in multifamily and commercial facilities. Designed with a motorized electric latch retraction (MEL), this exit device enhances energy efficiency while providing reliable electronic control. The RX-MEL is compatible with credential readers, allowing authorized users to unlatch doors momentarily or for extended periods, effectively replacing mechanical dogging. This Grade 1 device features a sleek satin chrome finish (626/US26D) and measures 36 inches by 96 inches, accommodating right-hand reverse/reversible installations. The modular design simplifies installation, and the onboard diagnostics make troubleshooting effortless. With a self-calibrating motor assembly, the push bar is electronically pulled in when dogged, ensuring seamless operation. Falcon's MEL technology is robust, detecting tampering and responding to vandalistic attacks, making it a reliable choice for high-traffic areas. The device operates on a 24VDC, 1 Amp power supply, which can be conveniently combined with Schlage power supplies. Additionally, it requires a power transfer device, sold separately, for optimal functionality. Invest in the Falcon Lock RX-MEL-25V-L-BE-DAN-US26D-36X96-RHR KIT to elevate your security measures while maintaining ease of access for authorized personnel.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 36in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged