Falcon Lock RX-MEL-25V-L-DAN-US26D-36X96-LHR RX Request to Exit Motorized Latch, SVR Vertical Rod, Dane Lever Trim 510L

Falcon Lock RX-MEL-25V-L-DAN-US26D-36X96-LHR KIT offers a sophisticated solution for controlled egress, combining advanced technology with reliable security. This RX Request to Exit system features motorized electric latch retraction (MEL), ideal for multifamily and commercial facilities seeking an efficient and cost-effective exit device. The SVR surface vertical rod design ensures robust security while enabling seamless access. With a satin chrome finish (626/US26D), this exit device not only meets the aesthetic demands of modern architecture but also adheres to Grade 1 performance standards, ensuring durability and reliability. The device is designed for left-hand reverse applications and accommodates doors sized 36 inches by 96 inches, requiring a 1-1/4 mortise cylinder for operation. The energy-efficient 24VDC, 1 Amp motor simplifies installation and operation, allowing for longer wire runs and compatibility with standard Schlage power supplies. With built-in diagnostics and self-calibrating features, troubleshooting is straightforward, enhancing operational efficiency. Vandal resistance further protects against tampering, making it suitable for high-traffic areas. The Falcon Lock RX-MEL-25V-L-DAN is the perfect choice for professionals seeking a balance of security, functionality, and style in exit device solutions.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged