Falcon Lock RX-MEL-25V-L-DAN-US26D-48X96-LHR RX Request to Exit Motorized Latch, SVR Vertical Rod, Dane Lever Trim 510L

Falcon Lock RX-MEL-25V-L-DAN-US26D-48X96-LHR KIT offers a cutting-edge solution for enhanced security in multifamily and commercial environments. This RX Request to Exit device features motorized electric latch retraction (MEL), allowing for efficient electronic control of exit access. Designed for 48in x 96in doors, this left-hand reverse/reversible device operates on 24VDC at 1 Amp, ensuring energy efficiency without compromising on performance. The modular design simplifies installation, making it compatible with existing Falcon 24 or 25 Series exit devices. The self-calibrating motor assembly guarantees reliable operation, while the onboard diagnostics facilitate troubleshooting, ensuring your exit solutions are always functioning optimally. This device supports mechanical egress and can be paired with credential readers for secure, momentary access. Highlighted by its vandal-resistant features, the RX-MEL-25V guarantees resilience against tampering. A power transfer solution (sold separately) is required for installation, along with compatible Schlage power supplies. With its satin chrome finish (626/US26D), this exit device not only enhances security but also complements modern architectural aesthetics. Invest in the Falcon Lock RX-MEL-25V for a reliable, high-performance security solution tailored for demanding environments.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged