Falcon Lock RX-MEL-25V-L-NL-DAN-US26D-36X96-RHR KIT - RX MEL Motorized Exit Device with Dane Lever Nightlatch Trim 510L-NL

Falcon Lock RX-MEL-25V-L-NL-DAN-US26D-36X96-RHR KIT is a state-of-the-art motorized electric latch retraction (MEL) exit device designed for both multifamily and commercial environments. This surface vertical rod exit device integrates seamlessly with credential readers for enhanced security, allowing authorized users to unlock doors effortlessly. With a sleek satin chrome finish, this Grade 1 device measures 36 inches by 96 inches, configured for right-hand reverse/reversible applications. The RX-MEL kit features energy-efficient motorized latch retraction, ensuring reliable operation while minimizing power consumption. Its modular design simplifies installation, allowing for easy conversion of existing Falcon 24 or 25 Series exit devices. The self-calibrating motor assembly enhances performance and durability, while built-in diagnostics aid in troubleshooting. Vandal-resistant technology ensures that the RX-MEL responds to tampering attempts, maintaining security integrity. This device operates on a 24VDC, 1 Amp power supply, compatible with a range of Schlage power supplies and option boards. Additionally, it requires a power transfer mechanism (sold separately) for complete functionality. Choose the Falcon Lock RX-MEL-25V for a robust, efficient, and reliable exit solution that meets modern security demands while providing effortless egress.

KIT - RX MEL Request to Exit, Motorized Electric Latch Retraction, Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged