Falcon Lock RX-MEL-25V-L-NL-QUA-US26D-48X96-LHR RX MEL Motorized Exit Device with Quantum Lever Trim, Satin Chrome, Grade 1

Falcon Lock RX-MEL-25V-L-NL-QUA-US26D-48X96-LHR KIT offers a robust and versatile solution for modern exit security needs. This motorized electric latch retraction (MEL) system is designed for multifamily and commercial properties, providing efficient electronic control of exit devices while ensuring mechanical egress. The surface vertical rod exit device is complemented by a Quantum Lever Nightlatch Trim, making it an excellent choice for high-traffic areas. The RX-MEL kit operates on a 24VDC power supply with a low inrush current of just 1 amp, ensuring compatibility with standard Schlage power supplies. This device can be integrated with credential readers to allow momentary unlatching for authorized users or can be set to retract latches for extended access. With its vandal-resistant features, the RX-MEL detects and responds to tampering, enhancing security. Installation is simplified thanks to a modular design, while on-board diagnostics assist with troubleshooting. The energy-efficient motor enables longer wire runs, making it a practical choice for various setups. This Grade 1 rated exit device comes in a sleek satin chrome finish (626/US26D) and fits doors sized 48 inches by 96 inches, left-hand reverse. Whether you're upgrading an existing system or installing a new one, the Falcon Lock RX-MEL-25V-L-NL-QUA is a reliable choice for enhanced safety and convenience.

KIT - RX MEL Request to Exit, Motorized Electric Latch Retraction, Surface Vertical Rod Exit Device, Escutcheon x Quantum Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, LHR, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged