Falcon Lock RX-MEL-25V-NL-US26D-48X96 KIT - RX Motorized Electric Latch Exit Device, SVR Vertical Rod, Satin Chrome

Falcon Lock RX-MEL-25V-NL-US26D-48X96 KIT offers a sophisticated solution for secure exit management in multifamily and commercial properties. This motorized electric latch retraction (MEL) device is designed to enhance energy efficiency while ensuring reliable mechanical egress. Its surface vertical rod exit device is complemented by a nightlatch pull trim, providing a complete security package. With a robust Grade 1 rating, this exit device operates at 24VDC with a low inrush current of 1 Amp, allowing compatibility with standard Schlage power supplies. The MEL option simplifies installation with its modular design, making it easy to convert existing mechanical Falcon 24 or 25 Series exit devices. This device can be integrated with credential readers for momentary unlatching or configured for extended free entry, effectively replacing mechanical dogging. The Falcon RX-MEL-25V also features on-board diagnostics for quick troubleshooting and a self-calibrating motor assembly, ensuring reliable performance. Its vandal-resistant construction detects tampering and attacks, enhancing overall security. This model requires a 1-1/4 mortise cylinder and is available in a sleek satin chrome finish (626/US26D), making it both functional and visually appealing. Elevate your security with the Falcon Lock RX-MEL-25V, designed for convenience and resilience in high-traffic areas.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Nightlatch Pull Trim 512NL, (Requires 1-1/4 Mortise Cylinder), (Requires 1-1/4 Mortise Cylinder), 48in x 96in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged