Falcon Lock RX-MEL-25V-TP-US26D-48X96 RX Request to Exit Motorized Latch, SVR Vertical Rod, 626 Satin Chrome

Falcon Lock RX-MEL-25V-TP-US26D-48X96 KIT features a state-of-the-art motorized electric latch retraction (MEL) system, designed to enhance security and convenience for multifamily and commercial properties. This exit device combines efficiency with robust performance, making it an ideal choice for high-traffic areas requiring reliable access control. The RX-MEL-25V-TP comes equipped with a surface vertical rod exit mechanism, complemented by a thumb piece pull trim, allowing for easy operation while maintaining a sleek design. This system operates on 24VDC at 1 Amp, meeting Grade 1 standards for durability and reliability. The satin chrome finish (626/US26D) not only offers a modern aesthetic but also provides enhanced resistance against wear and tear. The motorized latch retraction simplifies access for authorized users when integrated with credential readers, while ensuring mechanical egress at all times. Its modular design allows for straightforward installation on existing Falcon 24 or 25 Series exit devices. The self-calibrating motor assembly and on-board diagnostics streamline troubleshooting, ensuring minimal downtime. For added security, the device is vandal-resistant, detecting and responding to tampering attempts. The RX-MEL-25V-TP is compatible with various power supplies and requires a power transfer solution, ensuring seamless operation across multiple components. Whether upgrading your facility’s security or installing new systems, this Falcon Lock solution offers unparalleled performance and peace of mind.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Thumb Piece Pull Trim 512TP, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged