Hafele 003.55.006 Titebond Pro-Grade Plus Caulk

Hafele 003.55.006 Titebond Pro-Grade Plus Caulk

Hafele 003.55.006 Titebond, Pro-Grade Plus Caulk is an exceptional sealing solution designed for both interior and exterior applications. This black caulk effectively seals joints, repairs cracks, and fills gaps, ensuring a water-resistant barrier that stands the test of time. Its paintable formula allows for seamless integration with water-based latex paints within 2-4 hours, making it an ideal choice for finishing touches. Engineered to meet stringent standards, this caulk complies with ASTM C834 Type OP and ASTM C920 Type S, providing reliability for various projects. It is user-friendly, with easy cleanup using water and a working time of approximately 10-15 minutes for a 1/4" bead, allowing for efficient application. With a maximum coverage of approximately 31 feet per 10.1 oz cartridge, it’s suitable for a range of sealing tasks. To achieve optimal results, apply at temperatures above 40°F, ensuring surfaces are clean and dry. While it cures to a clear finish in 7-14 days, note that it should not be used for continuous submersion or below the waterline. For the best performance, store the caulk in a dry environment at or below 75°F. Whether you’re a building professional or a savvy homeowner, Hafele’s Pro-Grade Plus Caulk is a reliable choice for your sealing needs.

Titebond, Pro-Grade Plus Caulk

Black

For interior and exterior applications Seals joints, repairs cracks and fills gaps Paintable with a water based latex paint after application* Provides a water-resistant seal Tools easily and cleans up with water Complies with the following requirements: ASTM C834 Type OP Grade -18°C ASTM C920 Type S Grade NS Class 25 Pro-Grade Plus Clear is paintable in 4–6 hours Pro-Grade Plus Colors are paintable in 2–4 hours
APPLICATION GUIDELINES Application temperature: Above 40°F Coverage (maximum): Approximate length of bead according to bead diameter: Container bead: 1/4" bead 10.1 oz cartridge is 31 ft Working time: Approx. 10-15 minutes for a 1/4" bead Working surfaces:Surfaces to be caulked should be clean, dry and free from excess oil, grease, water, dirt or any other material that may deter excess. Properly designed joint not to exceed 1/2" in depth. Cut tip at 45° angle for 1/8" to 1/2" bead and place in professional cartridge gun. Apply caulk into clean joint. If necessary, smooth bead immediately. Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away. LIMITATIONS Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Clear sealant will be white during application but will clear within 7-14 days. Cure time is dependent upon ambient conditions including temperature and humidity. The caulk should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer. Clear is paintable in 4-6 hours. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Resources

• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 12.58A
• Technical data sheet