Hafele 372.27.702 Hafele Free Space Swing-Up Fitting 1.11

Hafele 372.27.702 Swing-Up Fitting, Hafele Free Space 1.11 offers exceptional versatility for standard flap applications. This fitting is designed to accommodate a variety of cabinet heights, supporting door weights of up to 9.3 kg, making it suitable for a wide range of projects. The sleek white housing and nickel-plated lever arm blend seamlessly into modern cabinetry, while its compact design maximizes storage space within the cabinet. Installation is straightforward, utilizing standard 32/37 mm line holes and a single pre-mounted screw, allowing for quick setup. The door opening angle can be adjusted to either 90° or 107°, providing flexibility based on user preferences and needs. The intuitive 3D door alignment and closing adjustment features ensure a perfect fit every time. This fitting is compatible with wood or aluminum frame doors, and no additional hinges or cover caps are required, streamlining the installation process. With the ability to support cabinet widths up to 1,800 mm, the Hafele Free Space fitting is an ideal choice for both professional builders and knowledgeable homeowners looking to enhance their cabinetry solutions. For optimal performance, remember to consider the door height and weight, including the weight of the handle when selecting the appropriate model.

Swing-Up Fitting, Hafele Free Space 1.11

for standard applications with handle, Model D, white

Important Selecting the correct model depends on door height and then door weight which should also consider the weight of the handle. We recommend ordering the stronger fitting if in doubt. The lever arms are spring loaded. There is a risk of injury and damage to the fitting! After mounting the arms, do not press them down in the open position until the counterweight of the door is mounted. A Pozi Drive #2 bit is required for all screw installations and adjustment features, otherwise damage to the screw head is likely. Be certain that Euro screws which attach the fittings to the side panels are completely tight, drawing the fitting tight against the side wall. For tension adjustment feature, we recommend using a cordless driver as these screws are geared very low. Be sure to adjust both sides to the same tensioning position.

• Sample measurements table for selecting the right model based on cabinet height and flap weight including handle Model B, EF≈480-983 Model C, EF≈856-1615 Model D, EF≈1460-2276 Model E, EF≈2086-3323 Model F, EF≈3040-4305 Cabinet height mm Flap weight kg Flap weight kg Flap weight kg Flap weight kg Flap weight kg 225 2.3–4.3 3.8–7.1 6.4–9.3 9.2–13.4 13.4–19.1 250 1.9–3.9 3.4–6.4 5.8–9.1 8.3–12.6 12.1–17.2 275 1.9–3.5 3.1–5.8 5.3–8.2 7.5–12.0 11.0–15.6 300 1.7–3.2 2.8–5.3 4.8–7.5 6.9–11.0 10.1–14.3 325 1.6–3.0 2.6–4.9 4.4–7.0 6.4–10.2 9.3–13.2 350 1.5–2.8 2.4–4.6 4.1–6.5 5.9–9.5 8.6–12.3 375 1.3–2.6 2.2–4.3 3.8–6.0 5.5–8.8 8.1–11.4 400 1.2–2.4 2.1–4.0 3.6–5.6 5.2–8.3 7.6–10.7 425 1.1–2.3 2.0–3.8 3.4–5.3 4.9–7.8 7.1–10.1 450 1.0–2.1 1.9–3.5 3.2–5.0 4.6–7.3 6.7–9.5 475 1.0–2.0 1.8–3.4 3.0–4.7 4.3–7.0 6.4–9.0 500 0.9–1.9 1.7–3.2 2.9–4.5 4.1–6.6 6.0–8.6 525 0.9–1.8 1.6–3.0 2.7–4.3 3.9–6.3 5.7–8.2 550 0.8–1.7 1.5–2.9 2.6–4.1 3.7–6.0 5.5–7.8 575 0.8–1.7 1.4–2.8 2.5–3.9 3.6–5.7 5.2–7.4 600 0.8–1.6 1.4–2.7 2.4–3.7 3.4–5.5 5.0–7.1 625 0.7–1.5 1.3–2.5 2.3–3.6 3.3–5.3 4.8–6.8 650 0.7–1.5 1.3–2.4 2.2–3.5 3.2–5.1 4.6–6.6
• Planning Front panel thickness Y mm 16 18 19 22 24 26 28 Distance X mm (with cabinet top panel thickness K=16 mm) 117 110 107 96 90 83 76

Resources

• CAD data
• Certificate
• Door Weight Calculation Chart
• Door Weight Ranges Chart_1.11
• Free space 1.11 installation instructions
• Installation instructions
• Installation instructions
• LGA - quality certificate for Free space 1.11
• Mounting Instructions
• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 9.102
• Technical data sheet
• Technical data sheet