Hafele 372.27.706 Hafele Free Space 1.8 Swing-Up Fitting

Hafele 372.27.706 Swing-Up Fitting, Hafele Free Space 1.8 offers an innovative solution for push-to-open applications, eliminating the need for handles with its Model C pto design. This fitting is exceptionally powerful and versatile, accommodating up to 80% of all flap applications while maintaining an extremely compact profile, thanks to Häfele's advanced engineering. The design allows for optimal space utilization within cabinets, making it ideal for modern interiors. With adjustable door opening angles of 90° or 107°, this fitting is suitable for wood or aluminum frame doors, and requires no additional hinges or cover caps. Installation is fast and straightforward, as it plugs into standard 32/37 mm line holes and secures with a pre-mounted screw. The intuitive 3D door alignment and closing adjustment features ensure seamless operation. Designed for cabinet heights ranging from 225 mm to 650 mm and a flap weight capacity of up to 7.1 kg, it fits cabinets up to 1,800 mm wide. The white housing and nickel-plated support lever add a sleek finish, enhancing the aesthetic appeal of your cabinetry. Supplied with all necessary fittings and instructions, the Hafele 372.27.706 ensures both functionality and style in your home or commercial space.

Swing-Up Fitting, Hafele Free Space 1.8

For push to open applications without handles, Model C pto, White

Important Selecting the correct model depends on door height and then door weight which should also consider the weight of the handle. We recommend ordering the stronger fitting if in doubt. The lever arms are spring loaded. There is a risk of injury and damage to the fitting! After mounting the arms, do not press them down in the open position until the counterweight of the door is mounted. A Pozi Drive #2 bit is required for all screw installations and adjustment features, otherwise damage to the screw head is likely. Be certain that Euro screws which attach the fittings to the side panels are completely tight, drawing the fitting tight against the side wall. For tension adjustment feature, we recommend using a cordless driver as these screws are geared very low. Be sure to adjust both sides to the same tensioning position.

• Planning Front panel thickness Y mm 16 18 19 22 24 26 28 Distance X mm (with cabinet top panel thickness K=16 mm) 117 110 107 96 90 83 76
• Sample measurements table for selecting the right model based on cabinet height and flap weight Model B pto, EF≈480-983 Model C pto, EF≈856-1615 Model D pto, EF≈1460-2276 Model E pto, EF≈2086-3323 Cabinet height mm Flap weight kg Flap weight kg Flap weight kg Flap weight kg 225 2.3–4.3 3.8–7.1 6.4–9.3 9.2–13.4 250 1.9–3.9 3.4–6.4 5.8–9.1 8.3–12.6 275 1.9–3.5 3.1–5.8 5.3–8.2 7.5–12.0 300 1.7–3.2 2.8–5.3 4.8–7.5 6.9–11.0 325 1.6–3.0 2.6–4.9 4.4–7.0 6.4–10.2 350 1.5–2.8 2.4–4.6 4.1–6.5 5.9–9.5 375 1.3–2.6 2.2–4.3 3.8–6.0 5.5–8.8 400 1.2–2.4 2.1–4.0 3.6–5.6 5.2–8.3 425 1.1–2.3 2.0–3.8 3.4–5.3 4.9–7.8 450 1.0–2.1 1.9–3.5 3.2–5.0 4.6–7.3 475 1.0–2.0 1.8–3.4 3.0–4.7 4.3–7.0 500 0.9–1.9 1.7–3.2 2.9–4.5 4.1–6.6 525 0.9–1.8 1.6–3.0 2.7–4.3 3.9–6.3 550 0.8–1.7 1.5–2.9 2.6–4.1 3.7–6.0 575 0.8–1.7 1.4–2.8 2.5–3.9 3.6–5.7 600 0.8–1.6 1.4–2.7 2.4–3.7 3.4–5.5 625 0.7–1.5 1.3–2.5 2.3–3.6 3.3–5.3 650 0.7–1.5 1.3–2.4 2.2–3.5 3.2–5.1

Resources

• CAD data
• Certificate
• Door Weight Calculation Chart
• Door Weight Ranges Chart_1.8
• Free space 1.8 push installation instructions
• Installation instructions
• LGA quality certificate for Häfele Free space 1.8 push
• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 9.103
• Technical data sheet
• Technical data sheet