Hafele 372.27.722 Hafele Free Space 6.15 Swing-Up Fitting

Hafele 372.27.722 Swing-Up Fitting, Hafele Free Space 6.15 is designed for heavy-duty applications, accommodating lid weights up to 25.7 kg and cabinet heights ranging from 350 to 650 mm. This robust fitting features a sleek white housing and nickel-plated support lever, ensuring both functionality and aesthetic appeal. Suitable for one-piece flaps, it offers an adjustable opening angle of either 90° or 107°, providing versatility in design. Installation is straightforward; the fitting mounts to the side panel with a single Euro screw, while the door can be easily attached without tools via sliding on to pre-mounted mounting plates. It is essential to choose the correct model based on door height and weight, including the handle's weight. For optimal performance, use a Pozi Drive #2 bit for adjustments and ensure screws are tightened securely. The Hafele Free Space 6.15 is specifically designed for wooden lids and is ideal for standard applications in both residential and commercial settings. Supplied with two fittings, front fixing brackets, and a complete set of mounting instructions, it provides everything needed for an efficient setup. Choose Hafele for reliable, high-quality hardware solutions that enhance your cabinetry.

Swing-Up Fitting, Hafele Free Space 6.15

Heavy Duty, for standard applications with handle, Model H, white

Important Selecting the correct model depends on door height and then door weight which should also consider the weight of the handle. We recommend ordering the stronger fitting if in doubt. The lever arms are spring loaded. There is a risk of injury and damage to the fitting! After mounting the arms, do not press them down in the open position until the counterweight of the door is mounted. A Pozi Drive #2 bit is required for all screw installations and adjustment features, otherwise damage to the screw head is likely. Be certain that Euro screws which attach the fittings to the side panels are completely tight, drawing the fitting tight against the side wall. For tension adjustment feature, we recommend using a cordless driver as these screws are geared very low. Be sure to adjust both sides to the same tensioning position.

• Planning Front panel thickness Y mm 16 18 19 22 24 26 28 Distance X mm (with cabinet top panel thickness K=16 mm) 117 110 107 96 90 83 76
• Sample measurements table for selecting the right model based on cabinet height and flap weight including handle Model G, EF≈4080-6600 Model H, EF≈6300-9000 Cabinet height mm Flap weight kg Flap weight kg 350 11.7–18.9 18.0–25.7 375 10.9–17.6 16.8–24.0 400 10.2–16.5 15.8–22.5 425 9.6–15.5 14.8–21.2 450 9.1–14.7 14.0–20.0 475 8.6–13.9 13.3–18.9 500 8.2–13.2 12.6–18.0 525 7.8–12.6 12.0–17.1 550 7.4–12.0 11.5–16.4 575 7.1–11.5 11.0–15.7 600 6.8–11.0 10.5–15.0 625 6.5–10.6 10.1–14.4 650 6.3–10.2 9.7–13.8

Resources

• CAD data
• Door Weight Calculation Chart
• Door Weight Ranges Chart_6.15
• Free Space 5.15 Push Sell Sheet EN
• Free Space 6.15 Mounting Instructions
• Installation instructions
• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 9.103A
• Technical data sheet
• Technical data sheet
• Technical data sheet