Hafele 833.75.757 Extension lead for Hafele Loox5 24 V, 3-pin (multi-white) offers a reliable solution for connecting your lighting systems. Designed specifically for use with Loox5 multi-white lights, this extension lead features a generous length of 78 3/4 inches (2000 mm), allowing for flexible placement in various settings. The 20 AWG, 4-conductor stranded copper construction ensures optimal performance, supporting a current carrying capacity of up to 3.5 A. This extension lead is rated Class 2 and is double insulated, adhering to safety codes such as NEC article 411 and NEC article 725.135, making it suitable for installations operating at 24 volts or less. The lead includes one socket and one plug connection, designed for seamless integration into your lighting setup. Keep in mind that while extended cable lengths can enhance installation flexibility, they may also lead to voltage drops with larger loads, potentially affecting brightness. To maintain optimal illuminance, it's essential to consider the rated output voltage of the driver when planning your configuration. With its durable plastic material and thoughtful design, the Hafele 833.75.757 Extension lead not only meets practical needs but also ensures a safe and efficient lighting experience.
Extension lead, Hafele Lighting 24 V, 3-pin (multi-white)
3.5 A, 20 AWG, Length: (78 3/4") 2000 mm
Lead length from Loox5 driver to device max. 10 m. Long cable lengths in combination with large loads (strip light lengths) can result in voltage drop in the cable. These lead to visible loss of brightness in the lights. The illuminance listed with the lights has been determined with the rated output voltage of the driver(24 V).
Area of application: For Loox5 multi-white lights
Cable length: 2,000.00 mm
Color system: MW
Connections: 1 x socket, Loox5 3-pin MW 24 V
Current carrying capacity: 3.50 A
Drill hole Ø: Plug 3/8"; socket 1/2"
Input ports: 1 x plug, Loox5 3-pin MW 24 V
Length (inch): 78 3/4"
Material: Plastic
Nominal voltage: 24.00 V
Number of leads: 3.00
Plug drill hole Ø: 9.00 mm
Socket drill hole Ø: 13.00 mm
Supplied with: 1 extension lead plug/socket
Version: Meets the following codes for wire and cable locations: > NEC article 411 Lighting systems operating at 30 V or less attached to Class 2 power > NEC article 725.135 Installation of Class 2 cable > NEC article 411.5 Specific Location Requirements
Wire cross section AWG: 20.00
