Hafele 833.95.935 Extension Lead is an essential accessory designed for use with tunable white 3-wire lighting systems in the Hafele Loox5 range. This 600 mm (23 5/8") extension lead features a robust 20 AWG wire gauge constructed from stranded copper, providing reliable connectivity with a current carrying capacity of 3.5 A. The lead is rated as Class 2 and is double insulated, ensuring safety and compliance with NEC codes for wire and cable locations. With a maximum lead length of 10 m (393 11/16"), it accommodates various installation configurations, although care should be taken with longer cable lengths to prevent voltage drops that may reduce light brightness. The extension lead includes one plug and one socket, both designed for easy integration into your lighting system. Crafted from durable plastic, the Hafele 833.95.935 is not only practical but also built to withstand the rigors of everyday use. The specific drill hole diameters-9.00 mm for the plug and 13.00 mm for the socket-facilitate straightforward installation. Whether you're enhancing residential interiors or commercial spaces, this extension lead offers the perfect solution for expanding your lighting capabilities while maintaining exceptional performance.
Extension lead, Hafele Lighting, 3-pin (multi-white)
3.5 A, 20 AWG, Length: (23 5/8") 600 mm
Lead length from Loox5 driver to device max. 10 m (393 11/16"). Long cable lengths in combination with large loads (strip light lengths) can result in voltage drop in the cable. These lead to visible loss of brightness in the lights. The illuminance listed with the lights has been determined with the nominal output voltage of the driver (12 V or 24 V).
Area of application: For use with tunable white 3-wire lights
Cable length: 600.00 mm
Color system: MW
Connections: 1 x socket, Loox5 3-pin MW 12 V
Current carrying capacity: 3.50 A
Drill hole Ø: Plug 3/8"; socket 1/2"
Input ports: 1 x plug, Loox5 3-pin MW 12 V
Material: Plastic
Nominal voltage: 12.00 V
Number of leads: 3.00
Plug drill hole Ø: 9.00 mm
Socket drill hole Ø: 13.00 mm
Supplied with: 1 extension lead 1 plug/1 socket
Version: Meets the following codes for wire and cable locations: > NEC article 411 Lighting systems operating at 30 V or less attached to Class 2 power > NEC article 725.135 Installation of Class 2 cable > NEC article 411.5 Specific Location Requirements
Wire cross section AWG: 20.00
