Ives 112HD 120IN 628 Heavy Duty Continuous Hinge - 120in for 1-3/4in Doors, 450lbs, Satin Aluminum

Ives 112HD 120IN 628 Full Mortise Heavy Duty Continuous Hinge is engineered for durability and reliability, making it an excellent choice for high-traffic environments. Designed for 1-3/4 inch doors, this hinge supports door weights up to 450 pounds without reinforcement, and up to 600 pounds with it, ensuring longevity and performance under heavy use. The geared continuous hinge distributes the weight of the door evenly along its frame, significantly reducing the stress typically experienced at the top of the door. This design minimizes the risk of hinge failure and maintains constant door alignment, preventing sagging over time. With a maximum door width of 48 inches, it accommodates both beveled and square edge doors, making it versatile for various applications. Available in a sleek satin aluminum finish (US28/628), this hinge is flush mounted for a clean look and is non-handed for custom cut lengths. It comes with standard mounting hardware, designed to exceed Grade 1 ANSI/BHMA 156.26 certifications for both 150 and 300-pound doors. Optional electric power transfer (EPT) and various security screw options are available for enhanced functionality. Make the Ives 112HD 120IN 628 your go-to choice for robust and reliable door functionality in any commercial or residential setting.

Full Mortise Heavy Duty Continuous Hinge - 120in, 1-3/4in Doors, up to 450lbs, 628/US28 Satin Aluminum

Geared continuous hinges are designed to last the life of a building by distributing the weight of a door along the entire length of its frame. The unique design reduces the high amount of stress normally associated at the top of the door and frame on butt hinge applications. Not only does this reduce hinge failure, it also keeps a door in constant alignment, eliminating the chance of door sag. These characteristics make continuous hinges suitable for high-use and high-traffic doors.

Features:

• For 1 3⁄4" doors
• Spread bearing design
• Non-handed for custom cut lengths
• Flush mounted, no inset
• 48" Maximum door width
• Beveled or square edge doors
• For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing

Specifications:

• Standard length: 83", 85", 95", 120"
• Standard mounting hardware: 12-24 x 3⁄4" Steel self drilling/self tapping phillips head screw
• Certifications: Exceeds Grade 1 ANSI/BHMA 156.26 for 150lbs and 300lbs

Options:

• EPT: Electric power transfer

Optional Mounting Hardware:

• SECHM: Security screws - hollow metal door and frame
• SECWDHM: Security screws - 1⁄2 wood, 1⁄2 hollow metal
• SECWDWD: Security screws - wood door and frame
• TEKWD: 1⁄2 Self drill, self tap 1⁄2 wood
• TF: Thread forming screws
• WD: Wood door and frame

Finishes:

• US28/628 - Clear Aluminum Anodized
• 313AN/710 - Dark Bronze Anodized