Ives 112HD 95IN 628 Heavy Duty Continuous Hinge - 95in for 1-3/4in Doors, 450lbs, Satin Aluminum

Ives 112HD 95IN 628 Full Mortise Heavy Duty Continuous Hinge offers a robust solution for high-traffic doors, supporting weights up to 450 pounds without reinforcement and up to 600 pounds when reinforced. Designed for 1-3/4 inch doors, this 95-inch hinge utilizes a spread bearing design that effectively distributes the door’s weight along the entire length of the frame. By minimizing stress typically concentrated at the hinge's top, it prevents sagging and maintains door alignment, ensuring longevity and reliability in demanding environments. This non-handed hinge is flush mounted, allowing for customizable cut lengths and easy installation on both beveled and square edge doors. Exceeding Grade 1 ANSI/BHMA 156.26 standards for durability, the 112HD is suitable for metal or wood doors and is available in a sleek clear aluminum anodized finish (US28/628). Additional features include standard mounting hardware of 12-24 x 3/4" steel self-drilling screws and options for electric power transfer. For enhanced security, various optional mounting hardware configurations are available to fit specific door types. The Ives 112HD continuous hinge exemplifies a perfect blend of strength and functionality, making it an ideal choice for commercial and industrial applications.

Full Mortise Heavy Duty Continuous Hinge - 95in, 1-3/4in Doors, up to 450lbs, 628/US28 Satin Aluminum

Geared continuous hinges are designed to last the life of a building by distributing the weight of a door along the entire length of its frame. The unique design reduces the high amount of stress normally associated at the top of the door and frame on butt hinge applications. Not only does this reduce hinge failure, it also keeps a door in constant alignment, eliminating the chance of door sag. These characteristics make continuous hinges suitable for high-use and high-traffic doors.

Features:

• For 1 3⁄4" doors
• Spread bearing design
• Non-handed for custom cut lengths
• Flush mounted, no inset
• 48" Maximum door width
• Beveled or square edge doors
• For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing

Specifications:

• Standard length: 83", 85", 95", 120"
• Standard mounting hardware: 12-24 x 3⁄4" Steel self drilling/self tapping phillips head screw
• Certifications: Exceeds Grade 1 ANSI/BHMA 156.26 for 150lbs and 300lbs

Options:

• EPT: Electric power transfer

Optional Mounting Hardware:

• SECHM: Security screws - hollow metal door and frame
• SECWDHM: Security screws - 1⁄2 wood, 1⁄2 hollow metal
• SECWDWD: Security screws - wood door and frame
• TEKWD: 1⁄2 Self drill, self tap 1⁄2 wood
• TF: Thread forming screws
• WD: Wood door and frame

Finishes:

• US28/628 - Clear Aluminum Anodized
• 313AN/710 - Dark Bronze Anodized