Ives COR52 628 W/FL20 52in Door Coordinator with 20in Filler Bar, UL, Satin Aluminum, 72in Opening

Ives COR52 628 W/FL20 Door Coordinator is designed specifically for pairs of doors, ensuring that one door closes before the other, which is essential for proper latching. With a channel length of 52 inches, this unit accommodates openings ranging from 62 to 92 inches, making it suitable for various applications, including pairs of 3'0" doors. The active door lever holds the door open until the inactive leaf closes, releasing the trigger mechanism for seamless operation. Constructed from durable 6000 series aluminum and finished in sleek satin aluminum (628/US28), the COR52 also features an adjustable override, allowing the active door to close under extreme pressure. This coordinator is compatible with flush bolts and is designed for unequal size openings, ensuring an architecturally clean look with optional filler bars available in various lengths. The unit meets ANSI/BHMA A156.3 Type 21A standards and is UL Listed for installation on labeled frames, ensuring compliance and reliability. Optional mounting brackets and security pin screws add further versatility to your installation options. With the Ives COR52, you can enhance the functionality and security of your door systems effortlessly.

Door Coordinator, 52in Channel Length with 20in Filler Bar, UL, for 72in Opening (Range 62in to 92in), 628/US28 Satin Aluminum

Ives offers various accessories to ensure a door is hung, protected and secured. Coordinators work with a flush bolt to secure a door and ensure a pair of doors close in proper order for latching to occur. With many bar coordinators, filler bars, mounting brackets, gravity coordinators and carry bars, Ives has coordinator needs covered.

Specifications:

• The COR Series coordinators are designed for use on pairs of doors when one door needs to close before the other
• All COR units function easily; The active door lever, located nearest to the active stop, holds the active door open until the trigger mechanism is released by the closing of the inactive leaf.
• All COR units do not function correctly with swing clear hinges. (consult factory when used with 3⁄4" offset pivots)
• All COR units are equipped with an adjustable override feature which allows the active door to close under extreme pressure
• All COR units are compatible with flush bolts
• For openings where doors are unequal size:
• The coordinator length should equal the active door width plus approximately 1⁄2 the inactive door width
• The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops
• The COR Series does not cover the entire length of the stop, so a FL filler bar can be provided to maintain architecturally clean lines
• Material Substrate: Aluminum 6000 Series
• Optional mounting brackets available: MB1, MB2, MB1F, MB2F, MB3F, MB1V, MB2V and MB3V for other stop applied hardware
• Security pin screws
• Replacement mounting package
• Replacement rub plate package
• Optional filler bars: FL20 - 20", FL32 - 32" and FL44 - 44", available to maintain clean line
• Security pin screws
• Special prep cut-outs: Required for certain vertical exit device applications
• Certifications: Meets ANSI/BHMA A156.3 Type 21A. UL Listed for installation on labeled frame

Sizes:

Finishes:

• 628/US28 - Satin Aluminum, Anodized
• 711/315AN - Black Anodized
• 713 - Satin Chrome, Anodized

Features

• All COR units function easily; The active door lever, located nearest to the active stop, holds the active door open until the trigger mechanism is released by the closing of the inactive leaf.
• Security pin screws
• The coordinator length should equal the active door width plus approximately 1⁄2 the inactive door width
• Optional mounting brackets available: MB1, MB2, MB1F, MB2F, MB3F, MB1V, MB2V and MB3V for other stop applied hardware
• The COR Series does not cover the entire length of the stop, so a FL filler bar can be provided to maintain architecturally clean lines
• Optional filler bars: FL20 - 20", FL32 - 32" and FL44 - 44", available to maintain clean line
• The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops
• Special prep cut-outs: Required for certain vertical exit device applications
• Certifications: Meets ANSI/BHMA A156.3 Type 21A. UL Listed for installation on labeled frame
• All COR units do not function correctly with swing clear hinges. (consult factory when used with 3⁄4" offset pivots)
• All COR units are equipped with an adjustable override feature which allows the active door to close under extreme pressure
• Replacement mounting package
• The COR Series coordinators are designed for use on pairs of doors when one door needs to close before the other
• All COR units are compatible with flush bolts
• Replacement rub plate package
• For openings where doors are unequal size:
• Material Substrate: Aluminum 6000 Series