Morris 96116 Anyone can use our Above Ground Connector

Morris 96116 Anyone can use our Above Ground Connector is designed for efficiency, allowing quick installation in just minutes, significantly saving valuable time on the job. This innovative connector eliminates the need for wire stripping, connecting, and taping of split bolts while removing the hassle of adding inhibitors. Ideal for overhead services-both insulated and bare mains, as well as street lighting and non-tension splicing-it can be installed on energized circuits without power shutdowns, though the tap must not be under load. The double shear-head bolt ensures proper torque tightening, delivering a quality connection and minimizing the risk of hot spots, damaged wires, or loose connections. Simply insert the jacketed cable into the entry port and tighten with a ½" socket; there's no cable stripping required. Engineered for durability, the connector features corrosion-free connections suitable for extreme conditions-hot, cold, damp, and salty environments-and seals water-tight during installation. Constructed from high-strength fiber-reinforced thermoplastic and galvanized steel bolts, the Morris 96116 is UL486B Listed for copper to copper, aluminum to aluminum, and copper to aluminum applications, rated for 600 volts and 194°F (90°C). With a height of 5.4", width of 3.1", and length of 5.0", this connector is a reliable choice for your electrical needs.

Anyone can use our Above Ground Connector

• Above ground connector can be installed on Energized Circuits eliminating Power Shutdowns
• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2" 6 point socket
• Eliminates Wire Stripping, Connecting & Taping of Split Bolts and Adding Inhibitor
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• The connector bodies are made from high-strength fiber-reinforced thermoplastic and galvanized steel bolts
• Can be installed on energized conductors, however, the tap must not be under load.
• UL486B Listed for cu to cu, al to al, & cu to al; 600 Volt, 194°F (90°C) Rated, Meets ANSI C119.4 requirements
• Overhead services - both insulated & bare mains, above grade URD services, street lighting, non-tension splicing & tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps.
• Corrosion-free connection is good for hot, cold, damp, & salty connections. Properly installed the connector seals water-tight. This is accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin plated, shell is high strength UV resistant thermoplastic insulating material, steel bolts are galvanized.
• Connector Installs In Just Minutes Saving Many Man-Hours On The Job
• The bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part.
• Model #'s: 96102 (TTD0510F), 96104 (TTD0810F), 96106 (TTD1010FBTUNI), 96108 (TTD1510FT), 96110 (TTD1810XFBTUNI), 96112 (TTD2110FBTUNI), 96114 (TTD2710FBTUNI), 96116 (TTD4010FBT), 96118 (TTD4310FBT), 96120 (TTD4510FT), 96122 (TTD5510FBT)

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet