Norton 7114SZ LH 24V 689 7100SZ Safe Zone Series

Norton 7114SZ LH 24V 689 7100SZ Series Safe Zone is a cutting-edge door closer designed for enhanced safety and functionality. This rigid arm, slide track door closer is engineered for left-handed applications, operating on a 24V system and featuring a sleek aluminum finish. The SafeZone employs a multi-point, electromechanical closer coupled with a programmable motion sensor that detects movement within its sensing field. When the door is manually opened, the system prevents it from closing if movement is detected, ensuring the safety of individuals such as those in wheelchairs, the elderly, or children. After movement ceases, the door will close automatically after an adjustable timeout period. With a maximum opening of 180 degrees and an adjustable hold-open feature up to 175 degrees, this device is ideal for high-traffic environments like theaters, hospitals, and schools. The closer is designed with hydraulic construction for smooth operation, featuring adjustable sweep and latching speeds, as well as backcheck cushioning. Installation is straightforward, with options for surface or soffit mounting on the pull side of doors ranging from 28" to 44" wide. The Norton 7114SZ is a reliable choice for commercial applications, providing peace of mind and accessibility for all users.

7100SZ Series Safe Zone

Rigid Arm, Slide Track, Pull Side SafeZone Door Closer, Size 4, Left Hand, 24V, Aluminum Painted

Designed with safety in mind, SafeZone takes door closers to a higher level. The handed SafeZone uses a multi-point, electromechanical closer and a programmable motion sensor. When the door is opened manually, SafeZone senses movement in the door opening and stops the door from closing. A physically disabled person in a wheelchair; an elderly person moving slowly; a child who stops to pick up a toy are all protected. When movement is no longer detected, the adjustable setting times out and the door closes. The hold open time and sensitivity are selectable. SafeZone detects movement in both directions, allowing one person or a stream of people to travel through an opening, making it ideal for theaters, hospitals, doctor's offices and elementary schools.

Designed with safety in mind, SafeZone® takes door closers to the next level.

SafeZone uses a multi-point, electromechanical closer and a programmable motion sensor. When the door is opened manually, SafeZone senses movement in the door opening and stops the door from closing. When movement is no longer detected, the adjustable setting times out and the door closes.

• Electromechanical closer units to be a multi-point, closer/holder type with selective hold open positioning achieved by electronic solenoid locking of closer arm slide into the track assembly. Closer/holder units to have a maximum opening of 180° (hold open to 175°) and are fail safe to close the door in the event of electrical power interruption.
• SafeZone Detection: Closer/holders units to have an integral sensor device monitoring a "zone of safety" at the door opening. SafeZone detection prevents the door from closing in the event of movement within the adjustable sensing field. Movement is detectable in both directions with selectable closer hold open time and sensor sensitivity. Mechanical closer to be hydraulic type with full rack and pinion construction enclosed in a cast aluminum alloy shell. Internal hydraulic fluid is to be non-gumming and non-freezing. Include two non-critical valves to independently regulate sweep and latching speeds and an adjustable backcheck cushioning valve. All valves are adjustable by hex key. Provide spring power adjustment permitting a 50% increase in closing power over the minimum closing force for any closer size. 
• Mounting: Closer units can be surface mounted to the frame face for application on the pull (hinge side) side of door, or soffit mounted on the push side of the door frame with projection of no more than 2-5/8" (67mm) from the frame face. Frame face must be a minimum 2" and ceiling clearance a minimum of 4". Door must be hung on either butt hinges or 3/4" offset pivot hinges, minimum 1-3/4" to 2-1/4" thickness.
• Installation: Provide optional handheld remote device for programming SafeZone sensor settings. Auxiliary door stops are recommended at closer/holder openings and required at doors opening beyond 110°. Interior installation only. 
• Power: Closer units operate on (120VAC, 60Hz) or (24VDC) with an amperage draw not exceeding (.086 Amps for 24VAC/DC) (.051 Amps for 120VAC). Supplier to coordinate electrical requirements with electrical and alarm system engineers. Field wiring (and conduit) by others.

Resources

• 7100REM Remote Programming Guide
• 7100SZ 120V with Fire Alarm Contacts
• 7100SZ 12V
• 7100SZ 24V
• 7100SZ 24V with Fire Alarm Contacts
• 7100SZ SafeZone
• 7100SZ Series Door Closer - Environment Product Declaration (EPD)
• 7100SZ Series Safe Zone Cut Sheet
• 7100SZ Series SafeZone Installation and Instruction Manual
• 7100SZ Series SafeZone with External Sensor Installation and Instruction Manual
• 7100SZ Series SafeZone with Selective Hold Open Installation Manual
• SafeZone Education Sell Sheet
• SafeZone Healthcare Sell Sheet
• SafeZone Overview Video
• Selective Hold Open Standard for SafeZone