Pemko CFMRG 83" Specialty Hinge, Clear

• Designed for wood or metal frames with applied facing or other decorative moldings.
• Designed to conceal both leaves.
• BL (Black Anodized) and PW (Painted White) are special finishes available upon request.
• Fasteners are No. 12-24 x 11/16" #10 Head FHUC, Type C, threadforming, no tapping required.
• Standard duty models: 16 fasteners required for each leaf.
• Wood screws available on request (specify on order).
• Standard duty hinge. 6" between bearing centers.
• Standard duty hinges conform to Grade 3-150 and Grade 3-300 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
• Tested and certified by Underwriters Laboratories Inc. (USA and Canada) to standard UL10B, UL10C and UBC 7.2 (positive pressure) for up to a 3-Hour (A-Label) fire listing for all 4 ft. 0 in. x 10 ft. 0 in.
• and 8 ft. 0 in. x 10 ft. 0 in. door and frame assemblies. Fire listing certifications apply to all approved hollow metal and wood door assemblies in drywall or masonry construction.
• Aluminum continuous hinge for use on swinging type fire doors of the hollow metal, tin-clad, sheet metal and steel covered composite type rated up to 3 hours, wood covered composite type rated up to and including 1-1/2 hours. Also wood core rated up to and including 20 minutes without hose stream.
• All hinges meet criteria of UBC 7.2 for positive pressure.
• Special FirePins are only required on 3-Hour (A-Label) assemblies.
• Certain door and frame conditions may require an extra 1/32"-1/16" clearance. Excessive clearance on fire rated assemblies may violate the requirements for NFPA 80.
• PemkoHinge® products are guaranteed for the life of the opening against defects in material or workmanship wit hthe exception of AL, RS, standard duty and Grade 3 hinges, which carry a 10 year warranty.
• Weight bearing (per BHMA standard ANSI/BHMA A156.26-2006) for standard models: 83" and 85" = 14 bearings, door weight = 280 lbs.; 95" = 16 bearings, door weight = 320 lbs.; 120" = 20 bearings, door weight = 400 lbs.
• Special hinge reinforcements are not required. Hollow metal door and frame manufacturers’ standard is acceptable. Removal of hinge reinforcements in the door and frame is not advised.
• Width: 5/16" (7.9 mm) (between frame edge and door edge, square edge door applications).
• Width: 11/32" (8.7 mm) (between frame edge and door edge, beveled edge door applications).
• Cap Width: 25/32" (19.8 mm).
• Height: 2-15/16" (74.6 mm) (to top cap/frame edge & door edge sides).
• Weight:

Resources

• 2019 Markar/Pemko Price Book
• Anti-Barricade Rescue Hardware Brochure
• Architectural Door Accessories - Cross Reference Sheet
• Architectural Door Accessories - Cross Reference Sheet
• Balanced Pivot Hinge Sell Sheet
• Catalog Section - Pemko FM_RG Raise Gear Hinge, HD1
• Category Specification
• DSH1000 Cut Sheet
• DSH1000 Instructions
• FM HD1 Cut Sheet
• FM HD1 Installation Instructions
• FM Series Cut Sheet
• FM Series Installation Instructions
• FM-SLF Cut Sheet
• FM-SLF HD1-M Cut Sheet
• FM-SLF Instructions
• FM-SLI Cut Sheet
• FM-SLI Instructions
• Net Length Hinge Bulletin
• Pemko Continuous Hinges Cut Sheet
• Pemko ElectroLynx Continuous Geared Hinges
• Pemko PT Order Form
• Pemko _FM_RG Application
• Pemko _FM_RG Line Drawing