CRL 616 3/8" Spearpoint Glass Drill BitC.R. Laurence 616 3/8" Spearpoint Glass Drill is designed to meet the needs of professionals seeking a reliable and cost-effective tool for drilling smooth holes in various materials, including glass, vitrolite, china, ceramic, and tile. Featuring a diamond-lapped, spade-shaped tip, this drill excels in performance, allowing for rapid drilling with precision. Optimally used with low RPM drilling machines, the C.R. Laurence Spearpoint Drill is compatible with models such as CRL2 and SDM4, but it performs best with regular power drills. The drill accommodates a glazing thickness of 1/8" to 1/2" (3 mm to 12 mm) and has a shank diameter of 15/64" (6 mm). When using this drill, it is essential to keep it cool with a suitable lubricant, like CRL's Cat. No. DTC80, to prolong its service life. Safety is paramount; always wear proper gear, including gloves and eye protection, while working on a flat, horizontal surface. Using a Ground Fault Circuit Interrupter (GFCI) is also crucial when operating electric tools with water or coolant. With its efficient design and versatile application, the C.R. Laurence 616 Spearpoint Glass Drill is an indispensable addition to any glazing professional's toolkit.
3/8" Spearpoint Glass Drill
- For Use with Low RPM Drilling Machines
- Available Sizes from 1/8" to 1/2" (3.2 to 12.7 mm)
- Works with CRL2, SDM4 or Regular Power Drills
This
CRL Spearpoint Glass Drill meets your demand for a low priced, reliable glass drill. The diamond-lapped, spade-shaped tip will drill many smooth holes in glass, vitrolite, china, ceramic, tile, etc. You can use this drill with hand held, low RPM drilling machines.
Capable of drilling holes very fast, this drill is easy-to-use, and will give you extended service life. You can conveniently use the CRL Spearpoint Drill in models such as CRL2, SDM4, and 41 Glass Drilling Machines, but it works best in a regular power drill. When working with these drills, be sure to keep the drill cool by using a lubricant, such as our Cat. No. DTC80.
NOTE: Always wear the proper safety gear, including gloves and eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter, such as CRL Cat. No. GF1, must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Drill Bit Size: 3/8 in. (10 mm)
Glazing Thickness: 1/8 in. To 1/2 in. (3 mm To 12 mm)
Shank Diameter: 15/64 in. (6 mm)
Shank Type: Round
Shipping Limitations: None
Speed: 400-800
Works On: CRL2 And SDM4
