CRL PH21ABS Brushed Stainless European Top Door Patch Fitting with 1NT303 InsertC.R. Laurence PH21ABS Brushed Stainless European Top Door Patch Fitting with 1NT303 Insert combines elegance and functionality, making it an essential component for any modern glass door system. Designed to accommodate either 3/8" or 1/2" (10 or 12 mm) glass, this fitting features a robust high-density cast body that ensures durability and stability, with a pivot setback of 2-9/16" (65 mm). Compatible with a variety of pivot options, including the CRL860 Top Walking Beam Pivot and 19/32" (15 mm) diameter pivots, the PH21ABS allows for seamless integration into your design. With a maximum weight capacity of 176 lbs. (80 kg) and a maximum width of 43" (1.11 m), it’s perfect for both residential and commercial applications. For those using 1/2" glass, the fitting supports dimensions up to 102" (2.59 m) tall. Complete with a template and instructions for easy installation, this patch fitting is not intended for laminated glass and requires specific glass fabrication, including a 3/4" (19 mm) diameter hole and corner notch. Finished in brushed stainless steel, this fitting not only enhances the aesthetic of any space but also requires periodic maintenance to maintain its factory finish. Trust in C.R. Laurence for quality and performance you can rely on.
Brushed Stainless European Top Door Patch Fitting with 1NT303 Insert
- 2-9/16" (65 mm) Pivot Setback
- High Density Cast Body
- For 3/8" or 1/2" (10 or 12 mm) Glass
The
CRL Top Door Patch Fitting includes the
1NT303 Insert for use with our
CRL860 Top Walking Beam Pivot,
1NT401 Surface Mount Top Pivot,
1NT405 Threaded Top Pivot, or other 19/32" (15 mm) Diameter type pivots. Finished covers are available in four standard finishes. Gaskets are supplied that allow this Patch Fitting to be used with either 3/8" or 1/2" (10 or 12 mm) Glass.
The following guidelines are to be used when making a door using this hardware:
Maximum Weight: 176 Lbs. (80 kg)
Maximum Width: 43" (1.11 m)
If the door exceeds any of these limitations, full door rails should be used.
GLASS FABRICATION REQUIRED:
One 3/4" (19 mm) Diameter
Hole and Corner Notch
COMES WITH:
Template and Instructions
Product Warning:
These fittings are not for use with Laminated Glass.
The following guidelines are to be used when making a 1/2" glass door using this hardware:
Maximum Height: 102" (2.59 m)
Maximum Weight: 194 Lbs. (80 kg)
Maximum Width: 42" (1.09 m)
If the door exceeds any of these limitations, full door rails should be used.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Finish/ Color:: Brushed Stainless Steel
Glazing Thickness: 3/8 in., 1/2 in. (10 mm, 12 mm)
Height: 2 in. (51 mm)
Insert Type: 1NT303
Length: 6-7/16 in. (164 mm)
Pivot Setback: 2-9/16
Series: European
Shipping Limitations: None
Type: Top
With Insert: Yes
Resources
