CRL PH41RA Satin Anodized Right Hand Sidelite Transom Patch with Support Fin BracketC.R. Laurence PH41RA Satin Anodized Right Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert offers a reliable solution for supporting a transom from a sidelite glass panel. Designed for compatibility with both 2-3/4" (70 mm) and 2-9/16" (65 mm) pivot setback door patch fittings, this transom patch is versatile and effective for various configurations. Constructed for use with 3/8" or 1/2" (10 or 12 mm) glass, the PH41RA accommodates both left and right-handed installations, making it an ideal choice for diverse architectural applications. The included 1NT300 insert allows for easy mounting of doors with compatible CRL top door patch fittings, while the option to remove the insert on the non-hinged side facilitates the installation of double swinging doors. For added support, a ceiling-mounted support fin bracket is recommended, especially if the weight of the transom exceeds 100 lbs. (45.4 kg), ensuring stability and safety. This product comes complete with a template and instructions for straightforward installation. Please note that glass fabrication is required, including five 3/4" (19 mm) diameter holes and two corner notches, and the fittings are not suitable for laminated glass. Enhance your architectural designs with the robust and stylish PH41RA transom patch from C.R. Laurence.
Satin Anodized Right Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
- Works with Both 2-3/4" (70 mm) and 2-9/16" (65 mm) Pivot Setback Door Patch Fittings
- For 3/8" or 1/2" (10 or 12 mm) Glass
- Left and Right Handed
The
CRL Left Hand Sidelite Mounted Transom Patch with Support Fin Bracket is used to support a transom from a sidelite glass panel. It comes with a
INT300 Insert for mounting a door with a CRL
PH20A or
PH21A Top Door Patch Fitting. For single doors, the insert can be removed on the non-hinged side allowing for a double swinging door. A
INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a
INT305 Transom Patch Keeper Insert can be installed for use with an
AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a
Ceiling Mounted Support Fin Bracket.
If the weight of the transom exceeds 100 lbs. (45.4 kg) the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. Use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact our Technical Sales Department for assistance.
GLASS FABRICATION REQUIRED:
Five 3/4" (19 mm) Diameter
Holes and Two Corner Notches
COMES WITH:
Template and Instructions
Product Warning:
NOTE: These Fittings are not for use with laminated glass.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Finish/ Color:: Satin Anodized
Glazing Thickness: 3/8 in., 1/2 in. (10 mm, 12 mm)
Handing: Right Hand
Insert Type: 1NT300
Mounting Type: Sidelite
Shipping Limitations: None
With Insert: Yes
Resources
