CRL PH41RDU Dark Bronze Right-Hand Sidelite Transom Patch with Support Fin and InsertC.R. Laurence PH41RDU Dark Bronze Right Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert is engineered for durability and functionality in architectural applications. This robust transom patch supports transom glass panels from sidelites, making it ideal for both commercial and residential installations. Compatible with 3/8" or 1/2" (10 or 12 mm) glass, this fitting works seamlessly with 2-3/4" (70 mm) and 2-9/16" (65 mm) pivot setback door patch fittings, ensuring versatility for various projects. The PH41RDU comes with a 1NT300 insert, facilitating easy mounting of doors with CRL’s PH20A or PH21A top door patch fittings. For those looking to create a double swinging door, simply remove the insert on the non-hinged side. Also, consider the INT306 Transom Patch Door Stop Insert for one-way doors, or the INT305L Keeper Insert to accommodate AMR205 locks for top installations. Designed with a black bronze anodized finish, the patch is not intended for laminated glass and requires specific glass fabrication, including five 3/4" (19 mm) diameter holes and two corner notches. A template and instructions are included for straightforward installation. Ensure compliance with design criteria for optimal performance and structural integrity.
Dark Bronze Right Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
- Works with Both 2-3/4" (70 mm) and 2-9/16" (65 mm) Pivot Setback Door Patch Fittings
- For 3/8" or 1/2" (10 or 12 mm) Glass
- Left and Right Handed
The
CRL Left Hand Sidelite Mounted Transom Patch with Support Fin Bracket is used to support a transom from a sidelite glass panel. It comes with a
INT300 Insert for mounting a door with a CRL
PH20A or
PH21A Top Door Patch Fitting. For single doors, the insert can be removed on the non-hinged side allowing for a double swinging door. A
INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a
INT305 Transom Patch Keeper Insert can be installed for use with an
AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a
Ceiling Mounted Support Fin Bracket.
If the weight of the transom exceeds 100 lbs. (45.4 kg) the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. Use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact our Technical Sales Department for assistance.
GLASS FABRICATION REQUIRED:
Five 3/4" (19 mm) Diameter
Holes and Two Corner Notches
COMES WITH:
Template and Instructions
Product Warning:
NOTE: These Fittings are not for use with laminated glass.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Finish/ Color:: Black Bronze Anodized
Glazing Thickness: 3/8 in., 1/2 in. (10 mm, 12 mm)
Handing: Right Hand
Insert Type: 1NT300
Mounting Type: Sidelite
Shipping Limitations: None
With Insert: Yes
Resources
