CRL PH41RPS Polished Stainless Right-Hand Sidelite Transom Patch with Support FinC.R. Laurence PH41RPS Polished Stainless Right Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert is engineered for robust support of transoms from sidelite glass panels. This versatile patch fitting accommodates both 2-3/4" (70 mm) and 2-9/16" (65 mm) pivot setback door patch fittings, making it ideal for various installation needs. Designed for use with 3/8" or 1/2" (10 or 12 mm) glass, it ensures a secure and reliable connection. The PH41RPS supports left and right-handed configurations, offering flexibility for diverse architectural designs. It comes equipped with a 1NT300 insert, allowing seamless mounting with CRL's PH20A or PH21A top door patch fittings. For single doors, the insert can be easily removed, enabling a double-swing configuration. If your project requires a one-way door, the optional 1NT306 transom patch door stop insert can be utilized. To ensure the transom's weight does not exceed 100 lbs. (45.4 kg), it must be secured to the ceiling, meeting safety standards and preventing slippage. This product includes a template and instructions for straightforward installation. Note that glass fabrication is required, including five 3/4" (19 mm) diameter holes and two corner notches. With its polished stainless steel finish, the PH41RPS combines durability and aesthetic appeal, perfect for contemporary architectural applications.
Polished Stainless Right Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert
- Works with Both 2-3/4" (70 mm) and 2-9/16" (65 mm) Pivot Setback Door Patch Fittings
- For 3/8" or 1/2" (10 or 12 mm) Glass
- Left and Right Handed
The
CRL Left Hand Sidelite Mounted Transom Patch with Support Fin Bracket is used to support a transom from a sidelite glass panel. It comes with a
INT300 Insert for mounting a door with a CRL
PH20A or
PH21A Top Door Patch Fitting. For single doors, the insert can be removed on the non-hinged side allowing for a double swinging door. A
INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a
INT305 Transom Patch Keeper Insert can be installed for use with an
AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a
Ceiling Mounted Support Fin Bracket.
If the weight of the transom exceeds 100 lbs. (45.4 kg) the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. Use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact our Technical Sales Department for assistance.
GLASS FABRICATION REQUIRED:
Five 3/4" (19 mm) Diameter
Holes and Two Corner Notches
COMES WITH:
Template and Instructions
Product Warning:
NOTE: These Fittings are not for use with laminated glass.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Finish/ Color:: Polished Stainless Steel
Glazing Thickness: 3/8 in., 1/2 in. (10 mm, 12 mm)
Handing: Right Hand
Insert Type: 1NT300
Mounting Type: Sidelite
Shipping Limitations: None
With Insert: Yes
Resources
