CRL PH70MBL Matte Black Transom Connector with Reversible Door Stops

C.R. Laurence PH70MBL Matte Black Transom Mounted Connector With Two Reversible Door Stops offers a versatile solution for your glass door systems. Designed for use with 3/8" or 1/2" (10 or 12 mm) monolithic tempered glass, this connector allows doors to swing either in or out, providing flexibility in your architectural design. The PH70MBL is equipped with two reversible door stops, enabling customization for your specific needs. You can set the stops so that one door opens inward while the other swings outward, making it a practical choice for both one lite and two lite transoms. For a more streamlined appearance, the connector can be used without the stops by simply turning the fitting around; this will conceal the notches in the cover plates for a clean finish. Installation is straightforward, as the product comes with a template and instructions, but note that glass fabrication is required, including three 3/4" (19 mm) diameter holes. With its sleek matte black finish, this connector not only provides functionality but also enhances the aesthetic appeal of your glass installations. Please be aware that these fittings are not suitable for laminated glass. Make the PH70MBL a part of your next project for an efficient and stylish solution.

Matte Black Transom Mounted Connector With Two Reversible Door Stops

• For 3/8" or 1/2" (10 or 12 mm) Glass
• Doors Can Swing Either In or Out
• Use Monolithic Tempered Glass

CRL Door Stops can be set for the doors to only open in or out. You can also make it so one door opens in and the other door opens out. The Connector can be used on one lite or two lite transoms, and with the stops removed can be used as a Connector only. When used as Connector only, it is suggested that you turn the fitting around so the notches in the Cover Plates face up, and are not visible.

Resources

• PH70 Template.dwg
• PH70 Template.pdf