Hafele 003.55.004 Titebond Pro-Grade Plus Caulk

Hafele 003.55.004 Titebond Pro-Grade Plus Caulk

Hafele 003.55.004 Titebond, Pro-Grade Plus Caulk is the ideal solution for both interior and exterior sealing needs. This versatile caulk is available in a sleek gray color, seamlessly blending with various surfaces while providing a reliable water-resistant seal. With a quick application time, it can be painted over using water-based latex paint in just 2–4 hours, allowing for efficient project completion. Designed to seal joints, repair cracks, and fill gaps, this caulk complies with ASTM standards, ensuring high performance and durability. The application temperature should be above 40°F, making it suitable for various climates. Coverage is impressive, with a 10.1 oz cartridge yielding approximately 31 feet of a 1/4" bead, and a working time of 10–15 minutes allows for easy manipulation. Cleanup is straightforward, as uncured material can be easily washed away with water, while cured excess must be cut or scraped off. It's important to note that this caulk is not suitable for continuous submersion or below-waterline applications. For optimal results, store it in a dry location at or below 75°F. Whether for professional use or home projects, Hafele Titebond Pro-Grade Plus Caulk delivers performance you can trust.

Titebond, Pro-Grade Plus Caulk

Gray

For interior and exterior applications Seals joints, repairs cracks and fills gaps Paintable with a water based latex paint after application* Provides a water-resistant seal Tools easily and cleans up with water Complies with the following requirements: ASTM C834 Type OP Grade -18°C ASTM C920 Type S Grade NS Class 25 Pro-Grade Plus Clear is paintable in 4–6 hours Pro-Grade Plus Colors are paintable in 2–4 hours
APPLICATION GUIDELINES Application temperature: Above 40°F Coverage (maximum): Approximate length of bead according to bead diameter: Container bead: 1/4" bead 10.1 oz cartridge is 31 ft Working time: Approx. 10-15 minutes for a 1/4" bead Working surfaces:Surfaces to be caulked should be clean, dry and free from excess oil, grease, water, dirt or any other material that may deter excess. Properly designed joint not to exceed 1/2" in depth. Cut tip at 45° angle for 1/8" to 1/2" bead and place in professional cartridge gun. Apply caulk into clean joint. If necessary, smooth bead immediately. Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away. LIMITATIONS Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Clear sealant will be white during application but will clear within 7-14 days. Cure time is dependent upon ambient conditions including temperature and humidity. The caulk should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer. Clear is paintable in 4-6 hours. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Resources

• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 12.58A
• Technical data sheet