Hafele 003.55.005 Titebond Pro-Grade Plus Caulk

Hafele 003.55.005 Titebond Pro-Grade Plus Caulk

Hafele 003.55.005 Titebond, Pro-Grade Plus Caulk is your go-to solution for both interior and exterior applications, expertly sealing joints, repairing cracks, and filling gaps with ease. Available in a cedar tan color, this caulk not only provides a water-resistant seal but is also paintable with water-based latex paint after application. With a working time of approximately 10-15 minutes for a 1/4" bead, it allows for quick and efficient use, making it ideal for any project. The coverage of the 10.1 oz cartridge is impressive, reaching up to 31 feet with a 1/4" bead. Application guidelines suggest that surfaces be clean, dry, and free from contaminants for optimal adhesion. This Pro-Grade Plus Caulk complies with ASTM standards and is designed for joints not exceeding 1/2" in depth. While it cures, the sealant appears white but will clear within 7-14 days. It is important to note that it should not be applied in conditions below 40°F or if rain is expected within 12 hours. For best results, ensure proper storage and consider using backing material. Clean uncured material easily with water, while excess sealant can be scraped away after curing.

Titebond, Pro-Grade Plus Caulk

Cedar tan

For interior and exterior applications Seals joints, repairs cracks and fills gaps Paintable with a water based latex paint after application* Provides a water-resistant seal Tools easily and cleans up with water Complies with the following requirements: ASTM C834 Type OP Grade -18°C ASTM C920 Type S Grade NS Class 25 Pro-Grade Plus Clear is paintable in 4–6 hours Pro-Grade Plus Colors are paintable in 2–4 hours
APPLICATION GUIDELINES Application temperature: Above 40°F Coverage (maximum): Approximate length of bead according to bead diameter: Container bead: 1/4" bead 10.1 oz cartridge is 31 ft Working time: Approx. 10-15 minutes for a 1/4" bead Working surfaces:Surfaces to be caulked should be clean, dry and free from excess oil, grease, water, dirt or any other material that may deter excess. Properly designed joint not to exceed 1/2" in depth. Cut tip at 45° angle for 1/8" to 1/2" bead and place in professional cartridge gun. Apply caulk into clean joint. If necessary, smooth bead immediately. Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away. LIMITATIONS Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Clear sealant will be white during application but will clear within 7-14 days. Cure time is dependent upon ambient conditions including temperature and humidity. The caulk should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer. Clear is paintable in 4-6 hours. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Resources

• TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 12.58A
• Technical data sheet