Images may not represent actual product and finish

Richelieu WEBSO1246014 Cold Press HPL Laminating 25

Your Price: $159.84

Moderately fast-setting adhesive for cold pressing high-pressure laminate, offering 15-minute lay up and 45-minute press times.

Part Number : RIC_WEBSO1246014

Availability: 15176151 In Stock

Quantity

Description

Richelieu WEBSO1246014 Cold Press HPL Laminating 25

Richelieu WEBSO1246014 LAMINATING 25 - COLD PRESS HPL is a high-performance adhesive specifically designed for cold pressing high-pressure laminate to various core materials. This moderately fast-setting adhesive strikes a balance between a generous 15-minute lay-up time and an efficient 45-minute press time, making it well-suited for diverse industrial applications. Preparation is crucial when using Laminating 25. Ensure that joints cut from rip saws are free of marks and that the edges are straight and square. Uniform thickness is essential, with variations not exceeding ± 0.005 in/0.12 mm. For optimal results, use abrasives finer than 50 grit during sanding and aim to prepare and glue joints on the same day whenever possible. With a recommended adhesive spread of 35-50 pounds per 1,000 square feet, or 170-250 grams per square meter, you can ensure efficient adhesion. Monitoring for squeeze-out along the glue line will help verify adequate coverage once the panels are under pressure. Richelieu's Laminating 25 is based on a polyvinyl acetate emulsion and has a viscosity of 5000 cps. Weighing 44 lbs, it ships conveniently via UPS. Note that this product is a special online order with a production time of 14 days.

LAMINATING 25 - COLD PRESS HPL

Laminating 25 is a moderately fast-setting adhesive for cold pressing high-pressure laminate to a variety of core materials. It is formulated to combine a long assembly time with a moderately fast press time. Laminating 25 fits the needs of most of the industry, combining a 15-minute lay up time with an approximately 45-minute press time.

Application

Preparation of stock that will be glued is extremely important. Joints cut from rip saws should be free of saw marks. They should also be straight and square. Molded or jointed stock should be free of knife marks. Glazed or burnished joints will prevent adhesive penetration and should be avoided.
Gluing stock should be uniform in thickness. Variation in thickness should not exceed ± 0.005 in/0.12 mm.
Sanding to thickness should be performed using higher than 50 grit abrasives. When possible, glue joints should
be prepared and glued the same day.

Spreads of 35-50 pounds of adhesive per 1,000 square feet or 170-250 grams per square meter of glue line are adequate. Verify adequate glue coverage by monitoring for squeeze out along the glue line once the panels are under pressure.

Attributes

Base: Polyvinyl Acetate Emulsion

Brand: Franklin Industrial

Product #: 4169700

Production Time: Special online order - 14 days

Viscosity: 5000 cps

Weight: 44 lb

Richelieu WEBSO1246014 Cold Press HPL Laminating 25

Attributes

Browse Similar Items

Recently Viewed Items