Morris 96122 Anyone can use our Above Ground Connector

Morris 96122 Above Ground Connector offers a revolutionary approach to electrical connections, designed for efficiency and safety. This connector installs in just minutes, significantly reducing man-hours on the job. By eliminating the need for wire stripping, connecting, and taping of split bolts, it streamlines the installation process. Capable of being installed on energized circuits, the Morris 96122 eliminates the need for power shutdowns, making it ideal for overhead services, insulated and bare mains, street lighting, and non-tension splicing. Its double shear-head bolt ensures proper torque every time, preventing hot spots and loose connections that can lead to failures. With a simple installation process-just insert the jacketed cable and tighten with a ½" socket-the connector is designed for user safety. The external components are isolated from energized parts, providing peace of mind during installation. Additionally, the corrosion-free design is suitable for various environments, and the water-tight seal protects against moisture and contaminants. This UL486B listed connector handles wire ranges from 750 to 250 and tap ranges from 500 to 250, with a torque rating of 330 inch-lbs. Made from high-strength fiber-reinforced thermoplastic and galvanized steel, the Morris 96122 combines durability with reliability for all your electrical needs.

Anyone can use our Above Ground Connector

• Above ground connector can be installed on Energized Circuits eliminating Power Shutdowns
• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2" 6 point socket
• Eliminates Wire Stripping, Connecting & Taping of Split Bolts and Adding Inhibitor
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• The connector bodies are made from high-strength fiber-reinforced thermoplastic and galvanized steel bolts
• Can be installed on energized conductors, however, the tap must not be under load.
• UL486B Listed for cu to cu, al to al, & cu to al; 600 Volt, 194°F (90°C) Rated, Meets ANSI C119.4 requirements
• Overhead services - both insulated & bare mains, above grade URD services, street lighting, non-tension splicing & tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps.
• Corrosion-free connection is good for hot, cold, damp, & salty connections. Properly installed the connector seals water-tight. This is accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin plated, shell is high strength UV resistant thermoplastic insulating material, steel bolts are galvanized.
• Connector Installs In Just Minutes Saving Many Man-Hours On The Job
• The bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part.
• Model #'s: 96102 (TTD0510F), 96104 (TTD0810F), 96106 (TTD1010FBTUNI), 96108 (TTD1510FT), 96110 (TTD1810XFBTUNI), 96112 (TTD2110FBTUNI), 96114 (TTD2710FBTUNI), 96116 (TTD4010FBT), 96118 (TTD4310FBT), 96120 (TTD4510FT), 96122 (TTD5510FBT)

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet