Morris 96110 Anyone can use our Above Ground Connector

Morris 96110 Above Ground Connector simplifies your wiring tasks with an innovative design that allows for quick installation in just minutes, significantly reducing labor time on the job. This connector eliminates the need for wire stripping, connecting, and taping of split bolts, allowing for effortless setup on energized circuits without power shutdowns. Versatile for various applications-overhead services, insulated and bare mains, street lighting, and tapping without cutting the main-this connector ensures a reliable connection. The double shear-head bolt guarantees consistent torque tightening, helping to prevent hot spots, damaged wires, and loose connections. Installation is a breeze; simply insert the jacketed cable into the entry port and tighten with a 1/2" socket. The red Turbo spacer allows for easy hand tightening, while the blue rubber insert recreates insulation on bare wire, safeguarding neutral messengers. Constructed with high-strength fiber-reinforced thermoplastic and galvanized steel bolts, the Morris 96110 is built to withstand harsh environments, maintaining a corrosion-free connection. With a water-tight sealant system, it protects against moisture and oxygen infiltration. This connector is compatible with wire sizes from 1/0 to 8 AWG, ensuring a robust solution for your electrical needs.

Anyone can use our Above Ground Connector

• No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2" 6 point socket
• Red Turbo spacer allows tap side to remain open while you hand tighten the above ground connector on the main wire (all models except 96102 & 96104)
• Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections
• The connector bodies are made from high-strength fiber-reinforced thermoplastic and galvanized steel bolts
• Can be installed on energized conductors, however, the tap must not be under load.
• Overhead services - both insulated & bare mains, above grade URD services, street lighting, non-tension splicing & tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps.
• Model #'s: 96102 (TTD0510F), 96104 (TTD0810F), 96106 (TTD1010FBTUNI), 96108 (TTD1510FT), 96110 (TTD1810XFBTUNI), 96114 (TTD2710FBTUNI), 96116 (TTD4010FBT), 96118 (TTD4310FBT), 96120 (TTD4510FT), 96122 (TTD5510FBT)
• Connector Installs In Just Minutes Saving Many Man-Hours On The Job
• Above ground connector can be installed on Energized Circuits eliminating Power Shutdowns
• Eliminates Wire Stripping, Connecting & Taping of Split Bolts and Adding Inhibitor
• Corrosion-free connection is good for hot, cold, damp, & salty connections. Properly installed the connector seals water-tight. This is accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin plated, shell is high strength UV resistant thermoplastic insulating material, steel bolts are galvanized.
• The bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part.
• Blue Rubber Insert recreates insulation when used on bare wire. Used to avoid any damage on neutral messenger. (Only on Models 96106, 96110, 96112, 96114)

Resources

• Catalog PDF page
• Spec Data Sheets
• Spec Sheet