Von Duprin 090040-00 Hex Dog Shaft 2/Pack

Von Duprin 090040-00 Hex Dog Shaft 2/Pack is an essential component designed for seamless functionality in various Von Duprin Panic exit devices shipped after 1997. This hex dogging shaft is compatible with the 22, 33, and 99 series exit devices, making it a versatile choice for professionals in the security hardware industry. Crafted to fit a 5/32" dog key, this long version of the shaft ensures adequate reach for effective operation. One common issue with shorter keys is their inability to fully engage, potentially leading to wear and rounded edges over time. The 090040-00 addresses this problem, as it is specifically designed to fit snugly into the exit device without compromising performance. Installation is straightforward; simply remove the old shaft using channel locks and replace it with the new one. Keep in mind that bending the ends of the adapter spring 090042 may be necessary for proper reinstallation. This product is packaged in a convenient 2-pack, ensuring that you have a spare on hand for quick replacements. For reliable performance and compatibility with a range of exit devices, the Von Duprin 090040-00 Hex Dog Shaft is a must-have for maintaining the integrity and security of panic exit systems.

Hex Dog Shaft 2/Pack

• The 22, 33, and 99 dogging shaft 090040 is the piece that the hex dogging key would fit into. The shaft is for a 5/32" dog key, but it has to be the long version. The shorter versions will not have enough reach to get all the way into the shaft. This is a very common problem area, the hole that the key fits in is only about 1/4" deep, and if you do not push down on the hex key when locking it open it will round out over time. To remove the shaft, just pull it straight out with a part of channel locks. We reinstalling the new one you might have to bend the ends of the adapter spring 090042 back down. This dogging shaft is for use on all Von Duprin Panic exit devices shipped after 1997.

Features

• The 22, 33, and 99 dogging shaft 090040 is the piece that the hex dogging key would fit into. The shaft is for a 5/32" dog key, but it has to be the long version. The shorter versions will not have enough reach to get all the way into the shaft. This is a very common problem area, the hole that the key fits in is only about 1/4" deep, and if you do not push down on the hex key when locking it open it will round out over time. To remove the shaft, just pull it straight out with a part of channel locks. We reinstalling the new one you might have to bend the ends of the adapter spring 090042 back down. This dogging shaft is for use on all Von Duprin Panic exit devices shipped after 1997.