Falcon Lock MEL-F25R-L-DT-QUA-US26D-36-RHR Motorized Electric Latch Exit Device, Fire Rated, Satin Chrome, 24VDC, Grade 1

Falcon Lock MEL-F25R-L-DT-QUA-US26D-36-RHR KIT features a motorized electric latch retraction (MEL) system designed for enhanced security and convenience in multifamily and commercial properties. This fire-rated rim exit device incorporates a sleek Quantum lever dummy trim, ensuring both functionality and modern aesthetics. Measuring 36 inches and available in a stylish satin chrome finish (626/US26D), this device provides a robust Grade 1 security solution. The MEL system allows for energy-efficient electronic control, enabling authorized users to unlatch doors using credential readers or to maintain an open state for extended periods, making it a viable alternative to mechanical dogging. The device is compatible with standard Schlage power supplies and supports simplified installation through its modular design. An on-board installation and troubleshooting diagnostic feature facilitates easy maintenance. Designed with vandal resistance, the MEL responds to tampering and attack attempts, ensuring reliable access control. The unit operates at a low inrush current of 1.0 amps, making it suitable for various environments with multiple components. Additionally, it requires a power transfer solution (sold separately) for complete installation. The MEL-F25R is an excellent choice for those seeking a blend of security, efficiency, and ease of use.

KIT - Motorized Electric Latch Retraction, Fire Rated Rim Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 36in, RHR Right Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged