Falcon Lock MEL-25R-TP-US26D-36 Motorized Electric Latch Retraction Rim Exit Device 512TP, Satin Chrome

Falcon Lock MEL-25R-TP-US26D-36 KIT features motorized electric latch retraction (MEL), designed for seamless electronic control of exit devices, making it an ideal choice for multifamily and commercial real estate settings. This rim exit device includes a thumbpiece pull trim for easy access and requires a 1-1/4 mortise cylinder. Operating on 24VDC with a current of 1 Amp, the MEL-25R is built to Grade 1 standards, ensuring durability and reliability. The energy-efficient motorized latch retraction allows for extended wire runs and compatibility with standard Schlage power supplies, enhancing system performance. Its modular design simplifies installation, while on-board diagnostics facilitate troubleshooting. The self-calibrating motor assembly ensures consistent operation, and the device responds to tampering attempts, providing an added layer of security. Additionally, the MEL can integrate with credential readers for authorized access, allowing for timed or momentary unlatching. This innovative device also supports automatic door operators. With multiple finish options available, including satin chrome (US26D), the Falcon Lock MEL-25R-TP not only offers functionality but also complements various architectural styles. Elevate your security solutions with this advanced exit device, tailored for convenience and safety.

KIT - Motorized Electric Latch Retraction, Rim Exit Device, Thumbpiece Pull Trim 512TP, (Requires 1-1/4 Mortise Cylinder), 36in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged