Falcon Lock MEL-25V-DT-US26D-48X96 Motorized Electric Latch Retraction SVR Exit Device, Dummy Pull Trim 512DT, 24VDC

Falcon Lock MEL-25V-DT-US26D-48X96 KIT is a cutting-edge motorized electric latch retraction (MEL) system designed for enhanced security in multifamily and commercial properties. This surface vertical rod exit device incorporates a dummy pull trim, making it both functional and aesthetically pleasing. With a robust Grade 1 rating and finished in sleek satin chrome (626/US26D), this exit device is built to last while providing an elegant touch. Featuring energy-efficient operation, the MEL allows for electronic control of the exit device, enabling seamless integration with credential readers for momentary unlatching for authorized users. This innovative design supports mechanical egress at all times, ensuring safety and compliance with regulations. The modular design simplifies installation, allowing for easy upgrades to existing Falcon 24 or 25 Series exit devices. The self-calibrating motor assembly and built-in diagnostic features streamline troubleshooting, while the vandal-resistant design enhances security against tampering. The MEL operates on a 24VDC power supply with a low inrush current of just 1 amp, making it compatible with standard Schlage power supplies. For optimal functionality, a power transfer device is required, sold separately. Upgrade your security with the Falcon Lock MEL-25V-DT-US26D-48X96 KIT, where reliability meets advanced technology.

KIT - Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Dummy Pull Trim 512DT, 48in x 96in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged