Falcon Lock MEL-25V-L-DAN-US26D-36X96-RHR Motorized Electric Latch Retraction SVR Exit Device with Dane Lever Trim 510L

Falcon Lock MEL-25V-L-DAN-US26D-36X96-RHR KIT offers a sophisticated solution for securing multiple entry points in both multifamily and commercial environments. This motorized electric latch retraction (MEL) system ensures energy-efficient electronic control of your exit devices, enhancing safety and convenience while minimizing operational costs. Designed for use with Falcon's 24 and 25 Series exit devices, the MEL option allows for seamless integration with credential readers, providing authorized users with quick access. The device features a self-calibrating motor assembly and built-in diagnostics for easy installation and troubleshooting, making it ideal for busy professionals and property managers alike. Constructed to meet Grade 1 standards, the device runs on 24VDC at 1 Amp, ensuring robust performance while remaining vandal-resistant. The satin chrome finish (626/US26D) not only complements various architectural styles but also stands up to daily wear and tear. For those seeking additional functionality, the MEL device can be paired with power transfer options and security monitoring systems. Its modular design allows for straightforward upgrades from existing mechanical units, making it a versatile choice for modern security needs. With the Falcon Lock MEL-25V, you can trust in a reliable, efficient, and stylish exit solution.

KIT - Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged