Falcon Lock MEL-25V-L-DAN-US26D-48X96-LHR Motorized Electric Latch Retraction SVR Exit Device with Dane Lever Trim 510L

Falcon Lock MEL-25V-L-DAN-US26D-48X96-LHR KIT offers cutting-edge security with its Motorized Electric Latch Retraction (MEL) technology. Designed for multifamily and commercial properties, this device features a surface vertical rod exit mechanism that ensures reliable egress while facilitating electronic control. The MEL can be paired with credential readers, allowing authorized users to gain access effortlessly, while also providing the option for extended latch retraction for free entry. This exit device is compatible with standard Schlage power supplies and boasts an energy-efficient 24VDC, 1 Amp motor that supports longer wire runs. The modular design simplifies installation on existing Falcon 24 or 25 Series exit devices, while the self-calibrating motor assembly ensures optimal performance. Notably, it also includes vandal-resistant technology that detects tampering attempts, enhancing security. The Falcon Lock MEL-25V-L-DAN features a satin chrome finish (626/US26D) and is designed for left-hand reverse (LHR) installations. With its Grade 1 rating, this exit device is built to withstand high traffic while maintaining functionality. Ideal for businesses prioritizing security and convenience, the Falcon Lock MEL-25V-L-DAN-US26D is a smart investment for any facility looking to upgrade its access control systems.

KIT - Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged