Falcon Lock MEL-25V-NL-US26D-48X96 Motorized Electric Latch Retraction SVR Exit Device, Nightlatch Pull Trim 512NL

Falcon Lock MEL-25V-NL-US26D-48X96 KIT offers a cutting-edge solution for secure access control with its motorized electric latch retraction feature. Designed for both multifamily and commercial properties, this surface vertical rod exit device combines convenience and efficiency, ensuring that mechanical egress is always available. With a sleek satin chrome finish, it fits seamlessly into various architectural styles. This Grade 1 device operates on a 24VDC power supply, drawing a mere 1 amp, making it energy efficient and compatible with standard Schlage power supplies. The modular design simplifies installation, allowing for easy upgrades from existing mechanical Falcon exit devices. Equipped with self-calibrating motor assembly and on-board diagnostics, the MEL-25V ensures reliable performance while detecting and responding to tampering attempts. The device can be integrated with credential readers for quick access or configured for extended latch retraction, eliminating the need for mechanical dogging. For added security, optional fail-safe and fail-secure trims are available. Note that a power transfer device is required for optimal operation, sold separately. Elevate your building's security with the Falcon Lock MEL-25V-NL-US26D-48X96 KIT, where technology meets reliability.

KIT - Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Nightlatch Pull Trim 512NL, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged