Falcon Lock MEL-F25V-L-DAN-US26D-36X96-LHR Motorized Electric Latch Retraction Exit Device, SVR, Dane Lever Trim 510L

Falcon Lock MEL-F25V-L-DAN-US26D-36X96-LHR KIT offers advanced security solutions with its motorized electric latch retraction (MEL) feature, making it an ideal choice for multifamily and commercial properties. This fire-rated SVR surface vertical rod exit device combines functionality and safety, ensuring reliable mechanical egress while providing electronic control. Designed to fit a 36-inch by 96-inch door with a left-hand reverse/reversible configuration, this exit device operates on 24VDC at 1 Amp, complying with UL standards and boasting a Grade 1 rating for durability. The satin chrome finish (626/US26D) not only enhances its aesthetic appeal but also ensures resistance to wear and vandalism. The MEL technology allows for energy-efficient operation, supporting longer wire runs and compatibility with standard Schlage power supplies. It can be integrated with credential readers for authorized access or used in systems that allow free entry, eliminating the need for mechanical dogging. The self-calibrating motor assembly includes built-in diagnostics for easy installation and troubleshooting. Ensure your facility's safety and convenience with the Falcon Lock MEL-F25V-L-DAN-US26D exit device-where advanced engineering meets user-friendly design.

KIT - Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged