Falcon Lock MEL-F25V-L-DT-QUA-US26D-36X96-RHR Motorized Electric Latch Retraction Exit Device with Quantum Lever Dummy Trim

Falcon Lock MEL-F25V-L-DT-QUA-US26D-36X96-RHR KIT offers a robust solution for modern security needs with its motorized electric latch retraction (MEL) feature. This fire-rated SVR surface vertical rod exit device is designed for multifamily and commercial properties, providing reliable performance while maintaining cost-effectiveness. The unit operates on 24VDC with a low inrush current of 1.0 amp, making it compatible with standard Schlage power supplies. The MEL option enhances the functionality of Falcon's 24 and 25 Series exit devices, allowing for electronic control that can integrate with credential readers for seamless access. This ensures mechanical egress at all times, promoting safety without compromising convenience. The modular design facilitates simplified installation, and the on-board diagnostics built into the motor assembly aid in troubleshooting. Constructed with vandal resistance in mind, this exit device can detect and respond to tampering, reinforcing security. The satin chrome finish (626/US26D) not only adds an aesthetic touch but also ensures durability. The kit includes escutcheon and Quantum lever dummy trim for a complete solution. With its comprehensive features and specifications, the Falcon Lock MEL-F25V-L-DT-QUA-US26D-36X96-RHR KIT stands as a premier choice for enhancing security in any building environment.

KIT - Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 36in x 96in, RHR Right Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged