Falcon Lock MEL-F25V-L-NL-QUA-US26D-36X96-RHR Motorized Electric Latch Retraction Exit Device with Quantum Lever Trim 510L-NL

Falcon Lock MEL-F25V-L-NL-QUA-US26D-36X96-RHR KIT is a sophisticated motorized electric latch retraction (MEL) system designed for fire-rated surface vertical rod exit devices. This robust solution combines the Quantum lever nightlatch trim with a 36" x 96" configuration, ensuring reliable performance in multifamily and commercial real estate settings. The device operates on a 24VDC power supply with a low inrush current of 1.0 amp, making it compatible with standard Schlage power supplies. The MEL feature provides energy-efficient electronic control, allowing for both momentary unlatching when combined with credential readers and extended periods of access for authorized users. This enhances convenience and security, serving as an effective alternative to mechanical dogging. Its modular design simplifies installation, enabling easy upgrades to existing Falcon 24 or 25 series exit devices. Additionally, the device is equipped with on-board diagnostics for installation and troubleshooting, a self-calibrating motor assembly, and vandal resistance to protect against tampering. The satin chrome finish (626/US26D) adds a touch of elegance while maintaining durability. For optimal functionality, a power transfer option is required, sold separately. The Falcon Lock MEL-F25V-L-NL-KIT is the ideal choice for those seeking a reliable and efficient security solution.

KIT - Motorized Electric Latch Retraction, Fire Rated Surface Vertical Rod Exit Device, Escutcheon x Quantum Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, RHR, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged