Falcon Lock MEL-25V-L-DT-QUA-US26D-48X96-LHR Motorized Electric Latch Retraction SVR Exit Device with Quantum Lever Trim

Falcon Lock MEL-25V-L-DT-QUA-US26D-48X96-LHR KIT offers a robust solution for commercial and multifamily facilities requiring effective access control. This motorized electric latch retraction (MEL) system is designed for use with Falcon's versatile 24 and 25 Series exit devices, enhancing security while providing the convenience of electronic control. The MEL feature allows for energy-efficient operation, enabling longer wire runs and compatibility with standard Schlage power supplies. Its modular design simplifies installation, making it an ideal upgrade for existing mechanical exit devices. The self-calibrating motor assembly ensures reliable performance, while integrated diagnostics support easy troubleshooting. Additionally, the MEL system is vandal-resistant, responding to any tampering attempts to maintain security integrity. The device is fail-safe or fail-secure compatible, allowing for tailored security options based on specific needs. With dimensions of 48 inches by 96 inches and a left-hand reverse/reversible configuration, this exit device is versatile enough to meet diverse installation requirements. Finished in a sleek satin chrome (626/US26D), the Falcon Lock MEL-25V is a stylish and functional addition to your security setup, ensuring safe and efficient egress while preventing unauthorized access.

KIT - Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Escutcheon x Quantum Lever Dummy Trim 510L-DT, 48in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged