Falcon Lock MEL-25V-L-NL-QUA-US26D-36X96-LHR Motorized Electric Latch Retraction SVR Vertical Rod Exit Device with Trim 510L-NL

Falcon Lock MEL-25V-L-NL-QUA-US26D-36X96-LHR KIT offers an innovative solution for secure exit management with its Motorized Electric Latch Retraction (MEL) feature. Designed for multifamily and commercial properties, this SVR Surface Vertical Rod Exit Device combines energy efficiency with ease of use. The 24VDC, 1 Amp system ensures reliable performance while allowing for longer wire runs, making it compatible with standard Schlage power supplies. This exit device features a modular design that simplifies installation, especially when converting existing Falcon 24 or 25 Series devices. The self-calibrating motor assembly and on-board diagnostics enhance installation and troubleshooting, ensuring peace of mind. With vandal resistance, the MEL device detects and responds to tampering, enhancing security. The MEL-25V-L-NL is suited for left-hand reverse doors measuring 36 inches by 84 inches, and it requires a 1-1/4 mortise cylinder for operation. The satin chrome finish (626/US26D) adds a sleek touch to your security hardware. Additionally, this device provides mechanical egress at all times, ensuring safety while allowing for controlled access through credential readers or extended unlatching periods. For those seeking a robust and efficient exit solution, the Falcon Lock MEL-25V-L-NL-QUA-US26D-36X96-LHR KIT stands out as a top choice in electrified panic devices.

KIT - Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Escutcheon x Quantum Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 36in x 84in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged