Falcon Lock MEL-F25C-L-NL-QUA-US26D-36X96-LHR Motorized Electric Latch Retraction Exit Device, Quantum Lever Trim, Satin Chrome

Falcon Lock MEL-F25C-L-NL-QUA-US26D-36X96-LHR KIT is a sophisticated motorized electric latch retraction (MEL) system designed for enhanced security in commercial and multifamily environments. This fire-rated concealed vertical rod exit device features a Quantum Lever Nightlatch Trim and is built to accommodate a 36-inch by 96-inch door with a left-hand reversible configuration. The MEL technology offers energy-efficient electronic control of the exit device, providing a cost-effective alternative to mechanical dogging. It allows for momentary unlatching via credential readers or extended periods of free entry, making it ideal for high-traffic areas. The self-calibrating motor assembly boasts onboard diagnostics for easy troubleshooting, while its vandal-resistant design ensures resilience against tampering. With a grade 1 rating, this exit device operates on 24VDC at 1 amp, ensuring compatibility with standard Schlage power supplies. It requires a mortise cylinder, which is sold separately. The modular design simplifies installation, and the unit meets UL standards for safety. Available in a sleek satin chrome finish (626/US26D), the Falcon Lock MEL-F25C is your reliable choice for safety and convenience in secure access solutions.

KIT - Motorized Electric Latch Retraction, Fire Rated Concealed Vertical Rod Exit Device, Escutcheon x Quantum Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged