Falcon Lock MEL-F25V-L-BE-QUA-US26D-48X96-LHR Motorized Electric Latch Retraction SVR Exit Device w/ Quantum Lever Trim

Falcon Lock MEL-F25V-L-BE-QUA-US26D-48X96-LHR KIT is a state-of-the-art motorized electric latch retraction device designed for enhanced security in multifamily and commercial real estate applications. This fire-rated SVR surface vertical rod exit device combines a sleek Quantum Lever Trim 510L-BE with a robust satin chrome finish, ensuring both functionality and aesthetic appeal. With its energy-efficient design, the MEL provides seamless electronic control, allowing authorized users to access secured areas effortlessly. Compatible with credential readers, it can temporarily unlatch doors or allow extended free entry, making it a versatile alternative to mechanical dogging. The modular design simplifies installation, and on-board diagnostics aid in troubleshooting, ensuring reliability in high-use environments. This exit device operates on a 24VDC power supply with a low inrush current of 1.0 amps, making it suitable for a range of configurations. Vandal-resistant features detect and respond to tampering, adding an extra layer of security. The MEL-F25V is UL listed and Grade 1 certified, guaranteeing high performance and durability. For any facility focused on safety and access control, the Falcon Lock MEL-F25V is an essential solution that combines modern technology with dependable security.

KIT - Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Blank Escutcheon x Quantum Lever Trim 510L-BE, 48in x 96in, LHR Left Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged