Falcon Lock MEL-F25V-L-NL-DAN-US26D-36X96-RHR Motorized Electric Latch Retraction Exit Device with Dane Lever Trim 510L-NL

Falcon Lock MEL-F25V-L-NL-DAN-US26D-36X96-RHR KIT is a state-of-the-art motorized electric latch retraction device designed for enhanced security in multifamily and commercial properties. This fire-rated SVR surface vertical rod exit device features a sleek satin chrome finish (626/US26D) that complements any architectural style, while its robust Grade 1 rating ensures top-tier durability. The MEL technology provides energy-efficient electronic control, allowing for seamless integration with credential readers for authorized access. It can also be used for extended periods of free entry, making it a practical alternative to mechanical dogging. This exit device is compatible with a variety of power supplies, including the PS900 Series, and features a self-calibrating motor assembly that simplifies installation and troubleshooting. Designed for right-hand reverse/reversible configurations, the MEL-F25V kit requires a 1-1/4 mortise cylinder, ensuring compatibility with standard door setups. Vandal resistance technology detects tampering, enhancing security further. The device is engineered for easy installation, with modular design enabling upgrades to existing Falcon exit devices. With a door size of 36in x 96in, the Falcon Lock MEL-F25V is an ideal choice for those seeking reliable, efficient, and secure access control solutions.

KIT - Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, RHR Right Hand Reverse/Reversible, UL, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering
• A power transfer (EPT, electrified hinge, door loop) provides a wiring path from the door to the frame. If an EPT (Electric Power Transfer) is utilized, the door and frame must be factory prepped.

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged