Falcon Lock RX-MEL-25R-L-BE-DAN-US26D-48-RHR KIT RX Motorized Electric Latch Exit Device, Rim, 24VDC, Grade 1, Satin Chrome

Falcon Lock RX-MEL-25R-L-BE-DAN-US26D-48-RHR KIT offers a sophisticated solution for modern security needs, combining motorized electric latch retraction with a rim exit device. Designed for both multifamily and commercial real estate, this device enhances access control while ensuring reliable egress. The 24VDC 1 Amp system achieves energy efficiency, making it an economical choice for your security infrastructure. This kit features the Dane Lever Trim 510L-BE and is constructed to fit 48-inch doors in a right-hand reverse configuration. With a Grade 1 rating and a sleek satin chrome finish (626/US26D), it meets the highest standards of durability and aesthetics. The self-calibrating motor assembly ensures seamless operation, while on-board diagnostics simplify installation and troubleshooting. Designed with user convenience in mind, the motorized electric latch retraction allows for credential readers to unlock the door momentarily for authorized users or keep it open for longer durations. This is particularly beneficial in high-traffic areas, providing a reliable alternative to mechanical dogging. Additionally, its vandal-resistant features protect against tampering, ensuring your premises remain secure. Enhance your building’s safety and accessibility with the Falcon Lock RX-MEL-25R-L-BE-DAN-US26D-48-RHR KIT.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Rim Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 48in, RHR Right Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged